The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Gti 180 gear selection
Forum Index › 206 Problems

watchs.gif

Author

Message

mattymj

Posted: Mon Apr 07, 2014 12:32 pm

Joined: Feb 07, 2010
Posts: 729
Trade Rating: 0
Location: Norfolk

Hi all. The gears on my 180 are sometimes hard to select. Is there a certain way to realign it all as its not been 100% since a clutch change. Thanks

gpvecchi

Posted: Mon Apr 07, 2014 2:33 pm

Joined: Feb 08, 2010
Posts: 526
Trade Rating: 0
Location: Italy

I had this problem, is the feel like the gear stick excursion is not enough to select the gear? In particular, 2nd and 4th gear? I changed for the second time the selection plate that is outside the gearbox (70€). There's a ridicoulus anti friction tiny thing that breaks easily, leaving too much movement to the plate. Now I'm looking for some modification.


	Silver grey RC\|Pug Sport remap\|Group A induction\|Supersprint backbox\|lower strut bar\|RCCup wishbones\|Eibach Pro-Street-S\|302mm brakes+23.8 master cylinder\|Vibra Technics\|Quaife LSD\|Cupra R splitter\|modded bonnet vent\|black Valeos\|207i tail lights\|Chromed rear foglight\|Bi-xenon 6000k+all led (in+out)\|406 rear mirror

mattymj

Posted: Mon Apr 07, 2014 3:03 pm

Joined: Feb 07, 2010
Posts: 729
Trade Rating: 0
Location: Norfolk

Well I just removed a nut below it a circle. Lift this up you will be able to pull the selector off. Leaving a shaft with two little shims. I put a little copper grease on the shaft. Carefully refitted everything. Now the gear selection seems smoother!

watchs.gif		All times are GMT
Forum Index › 206 Problems Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum