The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Forums Home

Forum FAQ

Help identify this part please!
Forum Index › 206 Problems

watchs.gif

Author

Message

Muddytoast

Posted: Mon Aug 15, 2016 12:35 pm

Joined: Aug 15, 2016
Posts: 6
Trade Rating: 0

This ring is rattling over bumps, the other side is tight but this one spins and has movement to rattle. What is it? Any idea on the problem? Its just a passed it's MOT. postimg.org/image/ib7f.../c4b9baf1/

gpvecchi

Posted: Mon Aug 15, 2016 1:40 pm

Joined: Feb 08, 2010
Posts: 526
Trade Rating: 0
Location: Italy

That's an heat shield to protect the gum from brake heat. It should not be so noisy... If you want to raplace it, it's very cheap.


	Silver grey RC\|Pug Sport remap\|Group A induction\|Supersprint backbox\|lower strut bar\|RCCup wishbones\|Eibach Pro-Street-S\|302mm brakes+23.8 master cylinder\|Vibra Technics\|Quaife LSD\|Cupra R splitter\|modded bonnet vent\|black Valeos\|207i tail lights\|Chromed rear foglight\|Bi-xenon 6000k+all led (in+out)\|406 rear mirror

Muddytoast

Posted: Mon Aug 15, 2016 2:31 pm

Joined: Aug 15, 2016
Posts: 6
Trade Rating: 0

Awesome, thanks for your help The play is up and down, as shown in this image. Worth replacing? I assume it's the rubber seal that needs replacing not the heat shield ring as it look as thin on the other side? postimg.org/image/7nhk...1/59602681

Steve206

Posted: Tue Aug 16, 2016 6:41 pm

Joined: Feb 07, 2010
Posts: 2718
Trade Rating: +6
Location: UK

Probably the ball joint knackered. Not the heat shield


	Work in Progress

gpvecchi

Posted: Tue Aug 16, 2016 6:52 pm

Joined: Feb 08, 2010
Posts: 526
Trade Rating: 0
Location: Italy

I replaced mine because of a tinging sound. If it's more a knock, it's the joint.


	Silver grey RC\|Pug Sport remap\|Group A induction\|Supersprint backbox\|lower strut bar\|RCCup wishbones\|Eibach Pro-Street-S\|302mm brakes+23.8 master cylinder\|Vibra Technics\|Quaife LSD\|Cupra R splitter\|modded bonnet vent\|black Valeos\|207i tail lights\|Chromed rear foglight\|Bi-xenon 6000k+all led (in+out)\|406 rear mirror

Muddytoast

Posted: Wed Aug 17, 2016 10:53 am

Joined: Aug 15, 2016
Posts: 6
Trade Rating: 0

It's not a knocking it is definitely a metallic rattle. Like shaking the washer on and nut. Wiggling that ring makes the exact same sound, The question is what is allowing the ring to move??

Muddytoast

Posted: Wed Aug 17, 2016 12:44 pm

Joined: Aug 15, 2016
Posts: 6
Trade Rating: 0

If it helps here are a few pictures of both sides Passenger side = Rattle: postimg.org/gallery/24i47ur0a/ Drivers side = No Rattle: postimg.org/gallery/1dl97pg6y/

Edward

Posted: Wed Aug 17, 2016 2:30 pm

Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage

There are little tangs that sit in the gap in the hub to ball joint mount. If the tang is squashed flat it will allow the shield to move about.


	2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible.

gpvecchi

Posted: Wed Aug 17, 2016 4:01 pm

Joined: Feb 08, 2010
Posts: 526
Trade Rating: 0
Location: Italy

There's a small piece that fits into yoke groove. If that is consumed, it rattles. Buy a new one it's 1 or 2£.


	Silver grey RC\|Pug Sport remap\|Group A induction\|Supersprint backbox\|lower strut bar\|RCCup wishbones\|Eibach Pro-Street-S\|302mm brakes+23.8 master cylinder\|Vibra Technics\|Quaife LSD\|Cupra R splitter\|modded bonnet vent\|black Valeos\|207i tail lights\|Chromed rear foglight\|Bi-xenon 6000k+all led (in+out)\|406 rear mirror

Muddytoast

Posted: Thu Aug 18, 2016 7:04 am

Joined: Aug 15, 2016
Posts: 6
Trade Rating: 0

Thanks guys! Very much appreciate the help. I'll check + get one ordered

watchs.gif		All times are GMT
Forum Index › 206 Problems Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum