|
Author
|
Message |
|
|
 Posted: Sat Aug 07, 2010 2:13 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
 |
Started to put the engine in today, was going to drop engine in from the top to the floor, bolt gearbox on and lift them up again. didn't really work very well so went back to my old way, bolt them together and lift them both in with a bit of careful movement.
Managed to get them in without too much hassle, one or two small scrapes, nothing that can be seen luckily.
Bolted in the driveshafts, clutch cable on and tested the clutch was working.
Went on to spanner check the entire from end, nice and tight bar the front hub nuts which still need torquing.
Went to get on with trying to take the old drum apart to get some parts out of it. Anthony tried his best to get it off but when 20 tons wouldn't remove the stub pin he swapped the arms. Got all the parts I need but unfortunatly the back plate that ive been sent is for the drivers side not passenger. If I had a stepper drill on me I would have modified it there and then, but unfortunatly didn't so it wont be back on 4 wheels this weekend.
| |  |
|
|
 |
 | |  |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Aug 16, 2010 10:14 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 6055
Trade Rating: +53
Location: Salisbury / New Forest
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Aug 16, 2010 10:34 am |
|
|
|
|
Joined: Feb 18, 2010
Posts: 4013
Trade Rating: +25
Location: Worcester
|
|
It's getting there finally! 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Aug 31, 2010 9:18 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 6055
Trade Rating: +53
Location: Salisbury / New Forest
|
|
It now runs... for a few seconds.
Needs the coolant system plumbed in next.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Aug 31, 2010 2:11 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
It now drives as well, as tested by me with lots of wheel spin!
| | |
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
|
|
Posted: Tue Aug 31, 2010 3:21 pm |
|
|
|
|
Joined: Jan 25, 2010
Posts: 3497
Trade Rating: +31
Location: VVT Land, Fife
|
|
Certainly is coming together now guys!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 01, 2010 3:14 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
|
|
Posted: Thu Sep 02, 2010 2:09 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 6055
Trade Rating: +53
Location: Salisbury / New Forest
|
|
| EdCherry wrote: |
| http://s450.photobucket.com/albums/qq227/D810XPH/?action=view¤t=205Drives.mp4 |
Nice
I may go over to the workshop this evening.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Sep 03, 2010 4:49 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
|
A picture says a thousand words.
| | |
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
|
|
Posted: Fri Sep 03, 2010 4:54 am |
|
|
|
|
Joined: Jan 25, 2010
Posts: 3497
Trade Rating: +31
Location: VVT Land, Fife
|
|
Yum 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Sep 12, 2010 5:11 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
|
So the car was like this, and the opportunity came to move the car. I always said the car would drive out of this workshop, so thats what we did and onto the trailer after changing the tyres so we could get some pressure in them.
Drove it onto the trailer, were it took a little journey to its temporary new home.
| | |
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
|
|
Posted: Sun Sep 12, 2010 5:13 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
|
Friday I finally started working on it again, started decoding some loom bits and bobs, welded the blow in the exhaust up (really badly oops!) and made some bits ready to TIG for the coolant system.
Finally handed the key back for the workshop yesterday after clearing it out after the PCAD at Combe.
| | |
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
|
|
Posted: Sun Sep 12, 2010 6:22 am |
|
|
|
|
Joined: Sep 05, 2010
Posts: 71
Trade Rating: 0
Location: Hampshire
|
|
That looks fantastic! and your premises look really nice too, I'm very jealous.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Sep 12, 2010 1:06 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
The premises is were im at uni currently. Spend loads of time there prepping the race cars so its nice to be able to take it there with me and spend some of that time on something of my own for once!
Hopefully not to long till it gets a nice few shiny bits that I need to fabricate for it.
| | |
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
|
|
Posted: Fri Sep 17, 2010 4:47 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 357
Trade Rating: 0
Location: Wiltshire
|
|
|
Back on the ground for Rallyday since the building is open to spectators
| | |
|
|
|
|
| | |
| 206 1400 8v HDi, Battle Bus - More Radical than Peugeot
205 1600 8v GTi, Track Toy Trauma, PatcHes - Driving again after 10 years since it was last on the road!
205 1600 8v GTi, The One and Only, FuDGe - Off the road again. Need to finish PatcHes first!
307 2000 16v XSi HDi - Comfy Cruiser
In theory, there is no difference between theory and practice. In practice, there is. | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [215]:
Visitors: 214
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
