The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Forums Home

Forum FAQ

Water Leaking + Erratic Running
Forum Index › 206 Problems

watchs.gif

Author

Message

DJPhyx

Posted: Tue Dec 14, 2010 7:45 am

Joined: Dec 14, 2010
Posts: 3
Trade Rating: 0
Location: Swansea

Hi Guys I'm new here, I have a 2005 1.4 and I have recently had several problem.
1, the heater matrix and radiator have both started to leak
2, there is a slight trace of white goo on the oil filler cap, it is very slight and only occurs when the engine is running.
3, it is ticking over at 1500rpm and keeps missing a beat or two.

I tried to do a compression test but my tester is too big, however all 4 plugs are clean (no carbon)

Could the head gasket cause the rad + matrix to burst?? but the strange thing is there is no pressure in the coolant tank even when the car is up to temp.

Can anybody point me to a free online workshop manual

Cheers


	DJ Phyx

panason1c

Posted: Tue Dec 14, 2010 7:55 am

Joined: Sep 05, 2010
Posts: 461
Trade Rating: 0
Location: Somerset

Is the coolant in the reservoir oily?, if it is, it is the head gasket failed.


	1.4 hdi, 206, Year..2003, 100,000 miles Mercedes, ML270CDI, 2002, 200,000 miles BMW K1200RS

DJPhyx

Posted: Tue Dec 14, 2010 8:35 am

Joined: Dec 14, 2010
Posts: 3
Trade Rating: 0
Location: Swansea

Thanks panason1c, Its very rusty coloured and when you shine a torch in there is a multicoloured swirl like oil on a pond so I would say yes. I thought as much I just posted for a second oppinion really. I take it these heads usually need skimming???


	DJ Phyx

panason1c

Posted: Tue Dec 14, 2010 8:41 am

Joined: Sep 05, 2010
Posts: 461
Trade Rating: 0
Location: Somerset

Skimming is not always necessary, have it checked for 'flatness' first.


	1.4 hdi, 206, Year..2003, 100,000 miles Mercedes, ML270CDI, 2002, 200,000 miles BMW K1200RS

richpowell91

Posted: Tue Dec 14, 2010 8:49 am

Joined: Feb 07, 2010
Posts: 898
Trade Rating: +5
Location: Melton Mowbray Leicestershire

Has it been overheating recently? Mine went on sunday and when i was talking about it to a mechanic, he said generally if its been overheating then there's a high risk that the head will have warped. Mine hasnt so im hoping when i take it off and get it measured for flatness it will be okay, but its got to come off so you may aswell get it checked and if it needs skimming its only about £60 to get it clean and skimmed.


	W reg, 1.4 GLX, Platinum Silver, Slowly getting there even if it does want to make me work hard for the privilege to drive it. 1988 205 1.6 Gti Long term project car. forum.205gtidrivers.co...pic=131655 - Slowly proceeding project thread.

mattievrs

Posted: Tue Dec 14, 2010 8:53 am

Joined: Feb 07, 2010
Posts: 2248
Trade Rating: +18
Location: Leicester

with the weather as it has been perhaps there wasnt enough antifreeze in the coolant and it froze? That would cause the leaks.


	NO LONGER ACTIVE ON THE FORUM

panason1c

Posted: Tue Dec 14, 2010 8:53 am

Joined: Sep 05, 2010
Posts: 461
Trade Rating: 0
Location: Somerset

Remember also that there is a limit as to how many times a head can be skimmed, so best not to have it skimmed if it doesnt need it.


	1.4 hdi, 206, Year..2003, 100,000 miles Mercedes, ML270CDI, 2002, 200,000 miles BMW K1200RS

DJPhyx

Posted: Tue Dec 14, 2010 9:15 am

Joined: Dec 14, 2010
Posts: 3
Trade Rating: 0
Location: Swansea

I think it did freeze, the heater matrix has been leaking for a while so been topping it up with water. wasn't a big leak so car didnt overheat, but I think it all might be down to freezing cause it reached -10 here the week before last and the next day the car was completely dead, even the battery was dead.

I will strip it, flush it check for flatness on the head and I already have a new matrix, just need a rad and gasket set.

Thanks for the help Guys

I will let you know how I get on and what I find.


	DJ Phyx

mattievrs

Posted: Tue Dec 14, 2010 10:25 am

Joined: Feb 07, 2010
Posts: 2248
Trade Rating: +18
Location: Leicester

DJPhyx wrote:

if thats true then id expect the block to be damaged around the water ways in the water jacket as water expands when frozen.So yeah its probably got a knackered head gasket at the very least.


	NO LONGER ACTIVE ON THE FORUM

watchs.gif		All times are GMT
Forum Index › 206 Problems Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum