The Peugeot 206 Info Exchange › Forums › The Car › 206 Talk › Wiring Required for Electric Folding Mirrors

Forums Home

Forum FAQ

Wiring Required for Electric Folding Mirrors
Forum Index › 206 Talk

watchs.gif

Author

Message

SteDuval1985

Posted: Thu Oct 13, 2011 8:22 am

Joined: May 29, 2010
Posts: 126
Trade Rating: +7
Location: Lancashire

I've done a search on electric folding mirrors but I'm a bit confused on exactly what wires are required for this mod.

First of all, I've checked my cabin loom (where the mirror switch will go) and I have the mirror plug with 10 wires coming from it, so I assumed I can go ahead and do this mod.

My car's an 06 Verve and doesn't have the mirror plugs, so I've managed to get hold of two door looms from a 180 that I expected would allow me to connect the mirrors up. Both looms have 9 wires going into the plugs.

However, I've read one thread on here that says to do this mod there should be 9 wires on the passenger side and 7 on the driver's side. Is this from the looms or the actual mirrors?

If I have 9 in both looms is it possible I have two passenger looms?

arronmee1990

Posted: Thu Oct 13, 2011 10:11 am

Joined: Apr 22, 2010
Posts: 451
Trade Rating: +7
Location: Broughton Astley

I don't know about the number of wires on each side of the loom but they best bet would be to get the mirrors and looms from the same car if possible. That's what I did anyway. You may need the bsi updating but I wouldn't have thought so being a 2006


	My Project Thread

Lee

Posted: Thu Oct 13, 2011 10:12 am

Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England

You need 9 wires in the pass and 7 in the drivers, in the door loom for it to work You need 10 at the switch side

Lee

Posted: Thu Oct 13, 2011 10:14 am

Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England

arronmee1990 wrote:

I don't know about the number of wires on each side of the loom but they best bet would be to get the mirrors and looms from the same car if possible. That's what I did anyway. You may need the bsi updating but I wouldn't have thought so being a 2006

BSI updating? Eh? Confused

dont need them from the same car either lol

SteDuval1985

Posted: Thu Oct 13, 2011 11:37 am

Joined: May 29, 2010
Posts: 126
Trade Rating: +7
Location: Lancashire

Lee wrote:

You need 9 wires in the pass and 7 in the drivers, in the door loom for it to work

You need 10 at the switch side

So the connector on the passenger loom should have 9 pins and and the connector on the driver loom should have 7 pins?

MrBSI

Posted: Thu Oct 13, 2011 3:16 pm

Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?

Fit the door looms, fit the switch & mirrors, job done. Reason there is 9 wires in the drivers door loom is its far easier & cheaper to just make one standard folding mirror door loom with the 9 wires in


	Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs.

arronmee1990

Posted: Thu Oct 13, 2011 4:15 pm

Joined: Apr 22, 2010
Posts: 451
Trade Rating: +7
Location: Broughton Astley

Lee wrote:

arronmee1990 wrote:

BSI updating? Eh? Confused

dont need them from the same car either lol

Only going on what someone told me when I asked but I didn't need mind doing.

I only said it'd be easier to get them from the same car. Less hassle if you can do this


	My Project Thread

SteDuval1985

Posted: Fri Oct 14, 2011 2:59 am

Joined: May 29, 2010
Posts: 126
Trade Rating: +7
Location: Lancashire

MrBSI wrote:

Fit the door looms, fit the switch & mirrors, job done.

Reason there is 9 wires in the drivers door loom is its far easier & cheaper to just make one standard folding mirror door loom with the 9 wires in Wink

Cheers MrBSI Wink

; this is what I assumed when I bought the two looms but just needed to doublecheck before I went and bought the mirrors. Plus, the guy I bought them from has just confirmed that they're both looms from the same 180. I've just bought the mirrors so once they arrive I'll go about fitting them.

Lee

Posted: Fri Oct 14, 2011 3:02 am

Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England

Need to check the switch too. Just because you are fitting a loom with 9 wires, doesn't mean the cabin loom wiring will magically be there

SteDuval1985

Posted: Fri Oct 14, 2011 3:43 am

Joined: May 29, 2010
Posts: 126
Trade Rating: +7
Location: Lancashire

This was the first thing I checked as you stated to do to the guy in this thread... www.206info.co.uk/Foru...rrors.html In my car, there are ten wires attached to the connector that will attach to the electric mirror switch.

SteDuval1985

Posted: Wed Nov 02, 2011 7:37 am

Joined: May 29, 2010
Posts: 126
Trade Rating: +7
Location: Lancashire

Thinking I was clever and had everything to do this mod, last week I went ahead and tried to do it. The result wasn't so promising Embarassed

When fitting the door looms, I found that the bulky plug at the end of the 180 door loom doesn't match the connector in my car.

The 180 connector is black / red with two horizontal lines of 8 pins in each line, and also has an extra blue connector:

[img]

Uploaded with ImageShack.us[/img]

My existing car loom's connector is yellow / blue and has a different pin arrangement:

So, if I get the interior loom out of a 180, to match the 180 looms I have, could I go ahead and complete this mod? Confused

watchs.gif		All times are GMT
Forum Index › 206 Talk Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum