|
Author
|
Message |
|
|
 Posted: Thu Mar 11, 2010 12:24 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 1031
Trade Rating: +7
Location: UK - North
|
 |
| Joe wrote: |
| G. What model do you have? The garage told me I have the switch but I've had a look and next to the clutch switch is hole. Is that were the switch is ment to be? |
yep that's where the brake switch would be.
maybe they're hidden under the carpet in true pug fashion.
| |  |
|
|
 |
 | |  |
| Former owner of a 1.4 HDi for six years | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Mar 11, 2010 2:02 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 776
Trade Rating: +1
Location: Coatbridge, Lanarkshire
|
|
so there has to be a brake and clutch switch??
was out testing my pugplanet  . same one as skards and it works perfectly.
got 4 engine faults. 2 to do with the camshaft sensor (i think) and 2 to do with the air sensor (too much air, and not enough air).
activated the seat belt warning light, overspeed warning, changed the MFD display, activated the auto-rear wiper on reverse (which ill need to check)
| | |
|
|
|
|
| | |
| Wagsy206
member since: Nov 2006
old post count: 5000+
Team: Honda Accord | |
| | |
|
|
|
|
|
|
|
Posted: Thu Mar 11, 2010 3:46 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 776
Trade Rating: +1
Location: Coatbridge, Lanarkshire
|
|
| skard wrote: |
i looked today without the stalk plugged in (i'm adding new keys to the 206) and the option in instrument cluster wasn't even present. the stalk has to be in first.
has anyone got the brake switch fitted as standard? there's a plate there ready to house it in mine. |
where is the brake switch located??
| | |
|
|
|
|
| | |
| Wagsy206
member since: Nov 2006
old post count: 5000+
Team: Honda Accord | |
| | |
|
|
|
|
|
|
|
Posted: Thu Mar 11, 2010 3:48 pm |
|
|
|
|
Joined: Jan 25, 2010
Posts: 3497
Trade Rating: +31
Location: VVT Land, Fife
|
|
Passenger side at the bulk head i think it's a white thing i think. It'll look like a switch. Never actually looked for it before  I hope you enjoyed my vague advice.
Regards,
Brian
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Mar 11, 2010 3:50 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 776
Trade Rating: +1
Location: Coatbridge, Lanarkshire
|
|
vague, but probably more than helpful, lol.
ill have a look tomorrow for it. ill be doing a diagnostic on my dads car as well, so i could maybe check the settings for the cruise control settings.
| | |
|
|
|
|
| | |
| Wagsy206
member since: Nov 2006
old post count: 5000+
Team: Honda Accord | |
| | |
|
|
|
|
|
|
|
Posted: Thu Mar 11, 2010 5:03 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 251
Trade Rating: 0
Location: Swindon
|
|
| Brian wrote: |
Passenger side at the bulk head i think it's a white thing i think. It'll look like a switch. Never actually looked for it before I hope you enjoyed my vague advice.
Regards,
Brian
|
So its not above the pedal then?
| | |
|
|
|
|
| | |
| 1.6 HDi. . . . The worst engine ever made | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 6:01 am |
|
|
|
|
Joined: Mar 09, 2010
Posts: 62
Trade Rating: +1
Location: 3553X
|
|
yeah that seems wierd , should be on the brake pedal , so when you hit the brakes cruise control disengages , like most other cars thats how it works, correct me if im wrong though.
| | |
|
|
|
|
| | |
| Previously 206 GTI SP.
Now SUBARU IMPREZA 2.0 AWD | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 7:03 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 1031
Trade Rating: +7
Location: UK - North
|
|
it should be above brake pedal, on the same mounting as the clutch switch.
| | |
|
|
|
|
| | |
| Former owner of a 1.4 HDi for six years | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 7:04 am |
|
|
|
|
Joined: Jan 26, 2010
Posts: 3432
Trade Rating: +1
Location: Kent
|
|
The 206 being a French designed car the servo and master are on the near side of the car, a bar runs from the pedal along the bulk head on right hand drives.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 7:11 am |
|
|
|
|
Joined: Jan 25, 2010
Posts: 3497
Trade Rating: +31
Location: VVT Land, Fife
|
|
| Joe wrote: |
| So its not above the pedal then? |
I thought the plug next to the clutch pedal is to do with the clutch for the the CC is it not? Otherwise EVERYONE would have that switch and there wouldn't have been 5 pages of "yes i have that switch" and "no i don't have the switch" earlier on in this thread.
By brake switch are you guys merely talking about the switch which turns the rear brake lights on/off 
Something needs clearing up as i'm confused now.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 7:58 am |
|
|
|
|
Joined: Feb 22, 2010
Posts: 181
Trade Rating: 0
Location: Hereford
|
|
You should either have a single brake switch with 4wire coming from it or 2 brake switches with 2 wires coming from each.
If you have a just a single brake switch with two wires coming from it then cc wont work. You will have to get a second switch and find the second cable in the car.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 10:04 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 1031
Trade Rating: +7
Location: UK - North
|
|
i have the 2 pin switch on the passenger side footwell, but not the additional switch that seemingly goes above the brake pedal. if you check a link i put to a french 307 site on page 21 you'll see pics of what i mean.
i think a switch has to be installed above the brake, run through the firewall and into the engine ECU.
| | |
|
|
|
|
| | |
| Former owner of a 1.4 HDi for six years | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 10:12 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 251
Trade Rating: 0
Location: Swindon
|
|
Im lost now, might just knock it on the head
| | |
|
|
|
|
| | |
| 1.6 HDi. . . . The worst engine ever made | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 11:00 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 776
Trade Rating: +1
Location: Coatbridge, Lanarkshire
|
|
same here joe.
if someone could take a picture of the switch in question and post it up, it would be very helpful.
| | |
|
|
|
|
| | |
| Wagsy206
member since: Nov 2006
old post count: 5000+
Team: Honda Accord | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 12, 2010 11:15 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 1031
Trade Rating: +7
Location: UK - North
|
|
there's a link to a pic on page 21 from me, but the 307 site i'm referring to has gone down at the minute.
in the passenger footwell, attached to the metal bar you'll see a switch. the one i am referring to is another one in addition to this.
keep trying the link and when it's up again you'll see what's going on.
| | |
|
|
|
|
| | |
| Former owner of a 1.4 HDi for six years | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [327]:
Visitors: 326
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
