|
Author
|
Message |
|
|
 Posted: Tue Jan 10, 2012 7:14 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 80
Trade Rating: +1
Location: Kent
|
 |
i recently had an off road excursion in my car which has resulted in me having to purchase another rear axle.
however after having this rear axle fitted (second hand axle btw) my car now seems to have quite a large amount of negative camber. it also drives like a bag of s**t. you know those skate boards where you can wobble your feet independantly of each other withthe bar across the middle? the handling is pretty much on par with that. there is also a horrible knocking noise that comes from the rear when you drive over a succession of bumps.
i have no idea how to fix this problem, i havent checked the hub bearings yet but will do asap. other than that im stumped for ideas. any suggestions welcome please.
| |  |
|
|
 |
 | |  |
| unique doesn't always mean useful | |
 | |  |
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 7:28 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4014
Trade Rating: +2
|
|
Are your shocks dead, are the bearings in the rear arms dead, is it fitted properly?
Have you fitted just the axle or have you had new rear arms too?
Have you baught an axle that has been crash damaged already?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 7:31 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 80
Trade Rating: +1
Location: Kent
|
|
the rear axle come off of a scrapped 206 gti. the whole axle was complete with shocks, arms torsion bar and hubs. donor axle come off a 56k gti. axle fitted properly and everything is tight.
| | |
|
|
|
|
| | |
| unique doesn't always mean useful | |
| | |
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 7:36 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4014
Trade Rating: +2
|
|
| Bill_G wrote: |
| the rear axle come off of a scrapped 206 gti. the whole axle was complete with shocks, arms torsion bar and hubs. donor axle come off a 56k gti. axle fitted properly and everything is tight. |
When you say negative camber do you mean the wheels are pointing in towards the top of the wheel arch?
I pressume you mean you have bad camber on the rear of the car?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 8:01 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 80
Trade Rating: +1
Location: Kent
|
|
yeah the wheels learn towards the top of the arch. its bad camber as i havent intentionally given the car negative camber 
| | |
|
|
|
|
| | |
| unique doesn't always mean useful | |
| | |
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 8:03 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 3666
Trade Rating: +59
Location: Scotland
|
|
Sounds like the bearings have collapsed.
| | |
|
|
|
|
| | |
| '98 Nile Blue 306 GTi 6
'04 Obsidian Black 206 GTi 138 | |
| | |
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 8:16 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 3978
Trade Rating: +8
Location: Leeds / West Midlands
|
|
wanna swap i want some camber?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 8:39 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 80
Trade Rating: +1
Location: Kent
|
|
im gonna check the bearings tonight, i guess they are pretty straight forward to do. are there any specialist tools needed or will a socket set and a big hammer sufice?
give me 900 quid and the car is yours!
| | |
|
|
|
|
| | |
| unique doesn't always mean useful | |
| | |
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 8:51 am |
|
|
|
|
Joined: May 12, 2011
Posts: 104
Trade Rating: 0
Location: Bournemouth/Newcastle/Kent
|
|
| JordGJ wrote: |
wanna swap i want some camber?
|
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 11:43 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
| Bill_G wrote: |
im gonna check the bearings tonight, i guess they are pretty straight forward to do. are there any specialist tools needed or will a socket set and a big hammer sufice?
give me 900 quid and the car is yours! |
straight forward, remove the wheel, knock out the torsion bars and remove the anti roll bar, and then you can knock out the trailing arm easily.
but once the arm is removed you will have to put new bearings on.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 12:16 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
[quote="Bill_G"]im gonna check the bearings tonight, i guess they are pretty straight forward to do. quote]
If the bearings are that worn I would imagine the axle tube will be knackered.
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
|
|
Posted: Tue Jan 10, 2012 12:48 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
As edward said it the bearings are gone and you are still driving it the axle tube WILL be f****d too which means another axle
| | |
|
|
|
|
| | |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
| | |
|
|
|
|
|
|
|
Posted: Sun Jan 15, 2012 9:55 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 80
Trade Rating: +1
Location: Kent
|
|
thanks for your help peeps. but the axle is completly fubar'd
jacked it up and checked the wheel bearings, they were fine, but the top bearings for the arm and the axle tube were flapping around like a witches tit. further more the camber has got worse so now when the car goes over bumbs, the O/S wheel rubs on the inside of the wheel arch.
gonna buy another axle and cross my fingers that it doesnt have the same problems. gonna contact the guy i got the other axle off and hope for a refund or something.
cheers again
| | |
|
|
|
|
| | |
| unique doesn't always mean useful | |
| | |
|
|
|
|
|
|
|
Posted: Sun Jan 15, 2012 10:06 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
second hand axle is always a gamble, anything older than a 05 reg is just basically useless
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Jan 15, 2012 10:20 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
You can buy a drum axle car and swop the stub axles and hubs to allow you to run rear discs if that widens the choice of axles available.
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [89]:
Visitors: 88
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
