|
Author
|
Message |
|
|
 Posted: Wed Jul 04, 2012 5:05 pm |
|
|
|
|
Joined: Aug 12, 2010
Posts: 190
Trade Rating: 0
Location: Cornwall, UK
|
 |
Noticed over last week or so, that went changing from 1st to 2nd, there is a slight squeal as I let the clutch up. Not from the pedal area, definately from the clutch itself. Does this mean the clutch is on the way out? Car is driving as normal, no sign of slipping and it doesn't happen on higher gears.
Its a 52reg 2.0Hdi, @ 97K.
Any ideas please?
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Wed Jul 04, 2012 5:44 pm |
|
|
|
|
Joined: Feb 24, 2010
Posts: 2596
Trade Rating: +17
Location: North West Wales
|
|
Could be thrust bearing which means new clutch time.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 05, 2012 2:26 am |
|
|
|
|
Joined: Aug 01, 2011
Posts: 390
Trade Rating: 0
Location: Bath UK
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 05, 2012 2:33 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2632
Trade Rating: +6
Location: Rugby,Warwickshire
|
|
Yep! If it's chirping anything like mine was its the bearing slipping. Look
Into clutch kits. It includes a clutch and bearing. Garages don't like to change just the bearing
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 05, 2012 3:06 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2720
Trade Rating: +6
Location: UK
|
|
Or your slave cylinder. Thats what pushs the clutch in and out.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 05, 2012 3:15 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 4455
Trade Rating: +1
Location: Essex
|
|
If the clutch release/thrust bearing is noisy, it's because the bearings are drying out, not slipping. The noise would problably be more noticeable at idle as well, stopping when you put your foot on the clutch. If it is the bearing it could last for miles/years like that as well. But if its definetly the clutch thats squealing in the lower gears (& not aux belts slipping), I reckon it's more likely to be the pressure plate &/or driven plate that's worn.
You can test for clutch slip by selecting a higher gear than normal, then try to accelerate as fast as you can. An increase in engine speed without an increase in acceleration would be a sign that the clutch is on its way out.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 05, 2012 6:17 am |
|
|
|
|
Joined: Jun 07, 2011
Posts: 806
Trade Rating: +6
Location: Woolsery, North Devon
|
|
| E5GDM wrote: |
If the clutch release/thrust bearing is noisy, it's because the bearings are drying out, not slipping. The noise would problably be more noticeable at idle as well, stopping when you put your foot on the clutch. If it is the bearing it could last for miles/years like that as well. But if its definetly the clutch thats squealing in the lower gears (& not aux belts slipping), I reckon it's more likely to be the pressure plate &/or driven plate that's worn.
You can test for clutch slip by selecting a higher gear than normal, then try to accelerate as fast as you can. An increase in engine speed without an increase in acceleration would be a sign that the clutch is on its way out. |
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [414]:
Visitors: 413
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
