|
Author
|
Message |
|
|
 Posted: Tue May 21, 2013 7:30 am |
|
|
|
|
Joined: May 10, 2013
Posts: 10
Trade Rating: 0
|
 |
Car parked on level ground: Yes.
Expansion bottle cap removed: is that the coolant reservoir bottle? I had it shut.
Heating to the cabin: Setting in hot but the fan was shut.
I let it warm until the radiator fan whiched on.
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Tue May 21, 2013 7:47 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2949
Trade Rating: +6
Location: Athens, Greece
|
|
| Sotirios wrote: |
Expansion bottle cap removed: is that the coolant reservoir bottle? I had it shut.
|
Needs to be open.
You have to squeeze the top pipe and see for possible bubles in the reservoir.
Let the bleed points open for quite a while and careful you don't burn yourself.
| | |
|
|
|
|
 | |  |
| 1.4i, 2001, 3-door, China Blue
Repair safely - Drive safely | |
 | |  |
|
|
|
|
|
|
|
Posted: Tue May 21, 2013 7:53 am |
|
|
|
|
Joined: Jan 15, 2013
Posts: 244
Trade Rating: 0
|
|
Just to make sure people know they need coolant/antifreeze in there cooling systems...its not just antifreeze to stop freezing but it also helps to keep the system cool.
Its vital to have a good correct amount of coolant/antifreeze in the car as water alone will not cut the muuusttaard...say i.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jun 10, 2013 4:22 pm |
|
|
|
|
Joined: May 10, 2013
Posts: 10
Trade Rating: 0
|
|
Hi all, it's me again.
I did everything mentioned above.
Some air (bubbles) came out from the allen bleed point. Nothing from the rear one (I managed to lose the tap, which I successfully replaced with a tap from my bicycle!).
But, apart from a slight improvement, the problem is still there.
I am able to keep the coolant temperature between 90 and 100 using the cabin heater on maximoum setting.
Any other ideas?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jun 10, 2013 5:58 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2949
Trade Rating: +6
Location: Athens, Greece
|
|
Γειά σου Σωτήρη,
It could be thermostat stuck closed, still clogged collant system/radiator or loose waterpump fins..
Sounds like it would need to be looked-at at this stage if you are still not happy with the engine temps.
| | |
|
|
|
|
| | |
| 1.4i, 2001, 3-door, China Blue
Repair safely - Drive safely | |
| | |
|
|
|
|
|
|
|
Posted: Tue Jun 11, 2013 9:11 am |
|
|
|
|
Joined: May 10, 2013
Posts: 10
Trade Rating: 0
|
|
Hi all.
I did everything that was mentioned before.
There was some air (bubbles)coming out from the allen bleed point.
No air came from the back bleeding point. I did manage to lose the cap, which successfully replaced by one from my bike!
There has only been a slight improvement but the problem is still there.
I can keep the coolant's temperature between 90 and 100+ most of the times by setting the cabin's temperature to max hot.
Any ideas?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jun 11, 2013 9:14 am |
|
|
|
|
Joined: May 10, 2013
Posts: 10
Trade Rating: 0
|
|
Thank you all for the advises.
(I posted twice as I thought my first message did not get through)
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [330]:
Visitors: 329
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
