|
Author
|
Message |
|
|
 Posted: Thu Mar 28, 2013 5:06 pm |
|
|
|
|
Joined: Sep 20, 2010
Posts: 246
Trade Rating: 0
Location: Sheffield
|
 |
As detailed above.
Has anyone changed the speed sensor on a 206 before?
Just wondering where it is as Ive got a P0500 fault so it will need to be replaced.
Its on a 1.6 hdi but I assume they are all in the same kind of place.
Cheers.
| |  |
|
|
 |
 | |  |
| - Sinature removed due to size.
Please feel free to upload one of the correct dimensions. | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Mar 28, 2013 5:10 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
Do these have it on the gearbox?
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
|
|
Posted: Thu Mar 28, 2013 5:12 pm |
|
|
|
|
Joined: Jan 23, 2012
Posts: 574
Trade Rating: +5
Location: Cheltenham
|
|
I believe they're on the top of the gearbox. It's a 616070 part numbe, so the common one
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Mar 28, 2013 5:26 pm |
|
|
|
|
Joined: Sep 20, 2010
Posts: 246
Trade Rating: 0
Location: Sheffield
|
|
I aint got a clue where they are.
If they are on the gearbox I take it they are at the flywheel end and take the signal from that?
| | |
|
|
|
|
| | |
| - Sinature removed due to size.
Please feel free to upload one of the correct dimensions. | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 29, 2013 2:32 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
It's on the final drive at the back of the gearbox. It's a battery out job to access it.
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 29, 2013 8:31 am |
|
|
|
|
Joined: Mar 02, 2013
Posts: 199
Trade Rating: 0
Location: kent
|
|
its on top of the diff (well on my 206 it is)
it plugs into part no2
| | |
|
|
|
|
| | |
| Topaz 2.0 16v 205 Gti6 (ph1.5)
Mercury 2.0 16v 206 Gti (ph1) | |
| | |
|
|
|
|
|
|
|
Posted: Wed Apr 03, 2013 2:35 pm |
|
|
|
|
Joined: Jul 14, 2012
Posts: 12
Trade Rating: 0
Location: United Kingdom
|
|
Just to let you know, my 2.0 hdi was supposed to have it on the final drive, but it didn't, ended up it was the front driver side abs sensor, which the speedo gets it's signal from, (if I remember correctly it has 2 wires going into the abs sensor plug)
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Apr 29, 2013 5:23 am |
|
|
|
|
Joined: Sep 20, 2010
Posts: 246
Trade Rating: 0
Location: Sheffield
|
|
Right.
I've just spoke to peugeot and the sensor is actually at the timing belt side of the engine and that try hardly ever go wrong but to check the gap between the sensor and the crank.
Failing that it could be the wiring in the fuse box in the inner wing.
Would anyone know if the abs fault I've got at the moment would have anything to do with the speed sensor fault?
| | |
|
|
|
|
| | |
| - Sinature removed due to size.
Please feel free to upload one of the correct dimensions. | |
| | |
|
|
|
|
|
|
|
Posted: Mon Apr 29, 2013 5:27 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2949
Trade Rating: +6
Location: Athens, Greece
|
|
So is your speedo not working (sensor on gearbox) or is it engine speed sensor (on the block)?
| | |
|
|
|
|
| | |
| 1.4i, 2001, 3-door, China Blue
Repair safely - Drive safely | |
| | |
|
|
|
|
|
|
|
Posted: Sun Jun 23, 2013 6:04 pm |
|
|
|
|
Joined: Sep 20, 2010
Posts: 246
Trade Rating: 0
Location: Sheffield
|
|
turns out that i needed 2 new abs rings and a speed sensor which was behing the bottom pulley drivers side.
Ended up with 2 new cv joints thou as they were dirt cheap on ebay.
Running like it should now at last.
| | |
|
|
|
|
| | |
| - Sinature removed due to size.
Please feel free to upload one of the correct dimensions. | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [139]:
Visitors: 138
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
