|
Author
|
Message |
|
|
 Posted: Mon Mar 03, 2014 6:39 pm |
|
|
|
|
Joined: Jan 05, 2013
Posts: 114
Trade Rating: 0
|
 |
Hi,
as I'm using my GTI 180 for Autocross I'm interested in the Peugeot Sport pivots and wishbones. However, I hope someone is able to answer a few questions.
This is what the pivot of the RCC and Group A looks like. Do I need to buy the driveshaft nut lock and the small parts aswell, or do the original pats fit?
And then, do I need coilovers to mount them, so the tyre does not scrub on the spring? These give 2° camber, so it should be a concern. Currently I am running H&R 35mm springs and ET25 7J rims.
There are two different wishbones available, Group N is a bit cheaper, Group A and RCC are a bit more expensive. What are the differences?
Group N
Group A and RCC
I would REALLY appreciate any help, as I'm really wanting to fit these.
BEST regards,
exis
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Tue Mar 04, 2014 2:03 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
The Group A use two metal bushes. The Group N will be standard arms with the usual one rubber and one metal bush.
You dont need the little bits from the front hub. You can buy they elsewhere (bearing etc) or use some of your existing parts.
| | |
|
|
|
|
 | |  |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
 | |  |
|
|
|
|
|
|
|
Posted: Tue Mar 04, 2014 2:26 am |
|
|
|
|
Joined: Feb 11, 2010
Posts: 41
Trade Rating: 0
Location: Barcelona (Spain)
|
|
Pivot are exactly as oem but 2 degrees of camber and no hole for abs sensor.
Can found troubles on stabilisator linkages.
Metal bushes can buy on oem peugeot spare parts
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Mar 04, 2014 2:26 am |
|
|
|
|
Joined: Feb 11, 2010
Posts: 41
Trade Rating: 0
Location: Barcelona (Spain)
|
|
Pivot are exactly as oem but 2 degrees of camber and no hole for abs sensor.
Can found troubles on stabilisator linkages.
Metal bushes can buy on oem peugeot spare parts
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Mar 04, 2014 1:16 pm |
|
|
|
|
Joined: Jan 05, 2013
Posts: 114
Trade Rating: 0
|
|
Thank you.
Did you install them on your car?
I suppose the holes for the abs sensor could be drilled ?
@Edward:
Are the Group A wishbones worth the upgrade or do powerflex/superpro bushes the job as good? And which of the three bushes are metal?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Mar 05, 2014 5:33 am |
|
|
|
|
Joined: Jun 19, 2010
Posts: 1600
Trade Rating: +4
Location: South Bucks
|
|
Do you want/need ABS on a autocross car?
The two main bushes are the metal ones .. the outer one is the balljoint ...
| | |
|
|
|
|
| | |
| Down to just the 1.4 HDi. Cayman Green 2.0i CC sold. | |
| | |
|
|
|
|
|
|
|
Posted: Wed Mar 05, 2014 6:15 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
| existenz wrote: |
@Edward:
Are the Group A wishbones worth the upgrade or do powerflex/superpro bushes the job as good? And which of the three bushes are metal? |
Hard to answer...they do make a tiny difference in feel through the car...but not really worth the extra money. Standard rubber bushes are hardly made from jelly.
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
|
|
Posted: Wed Mar 05, 2014 11:21 am |
|
|
|
|
Joined: Feb 11, 2010
Posts: 41
Trade Rating: 0
Location: Barcelona (Spain)
|
|
Yes can be drilled 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Mar 06, 2014 3:33 pm |
|
|
|
|
Joined: Jan 05, 2013
Posts: 114
Trade Rating: 0
|
|
| gazza82 wrote: |
Do you want/need ABS on a autocross car?
The two main bushes are the metal ones .. the outer one is the balljoint ... |
I need ABS as the car is still street legal. I'm just looking for a way to get some negative camber.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Mar 06, 2014 4:14 pm |
|
|
|
|
Joined: Jul 13, 2010
Posts: 1032
Trade Rating: +10
Location: sutton surrey/welwyn garden city
|
|
| gazza82 wrote: |
I'm just looking for a way to get some negative camber. |
Just wait for the axle to collapse 
| | |
|
|
|
|
| | |
| You never really learn to swear until you learn to drive | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 07, 2014 12:09 am |
|
|
|
|
Joined: Jun 04, 2010
Posts: 1691
Trade Rating: +3
Location: northallerton
|
|
| ukskater01 wrote: |
| gazza82 wrote: |
I'm just looking for a way to get some negative camber. |
Just wait for the axle to collapse |
hes on about the front
have you thought about drilling the top mounts to get some camber
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Mar 08, 2014 6:42 pm |
|
|
|
|
Joined: Jan 05, 2013
Posts: 114
Trade Rating: 0
|
|
I have thought about that. Anyway, that would be the least favourite way to do it.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 09, 2014 7:22 am |
|
|
|
|
Joined: Jun 04, 2010
Posts: 1691
Trade Rating: +3
Location: northallerton
|
|
cheapest tho lol
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Nov 10, 2014 11:43 am |
|
|
|
|
Joined: Nov 08, 2011
Posts: 141
Trade Rating: 0
Location: Trinidad and Tobago
|
|
I know I'm bumping an old thread but last year when speaking to pug sport via email . The guy had explained the difference to me regarding the grp A and grp N wishbones. The group A ones require machining but not 100% sure what he meant but have an idea, now I don't know french so those of you who can have a look at this and translate it please(google translate is not to great at doing technical translations).
Quotes from the emails: (1st i translated with google; 2nd one left as is so no information is lost or skewed)
Hello,
The most efficient triangles are the references below, are mounted on 206 XS, CC and RCC following are specific attachments.
Right triangle
www.peugeotsport-store...erway=desc
Left triangle
www.peugeotsport-store...erway=desc
The full documentation is available on www.peugeotsport-store...ubrique=22
Kind regards.
the other email:
Le triangle 206 XS Volant se monte sur une 206 RC après usinage de la rotule à 48,8 mm ou en écartant la chape de berceau suivant les documents ci-joints. Attention, ce triangle est pour la compétition uniquement.
There were a few PDF documets he attached but those were in French also, and honestly I'm a bit lazy atm so I'll post links to them abit later.
BTW I did ask for their recommendation for best wishbones for autocross also.
| | |
|
|
|
|
| | |
| GTi 180 Obsidian Black
SW 1.6 16v Sahara Yellow | |
| | |
|
|
|
|
|
|
|
Posted: Mon Nov 10, 2014 11:48 am |
|
|
|
|
Joined: Nov 08, 2011
Posts: 141
Trade Rating: 0
Location: Trinidad and Tobago
|
|
I did go with teh GRP N wishbones in the end as they seemed as the best/safest bet at the time and cheaper. In Trinidad for a single original wishbone from the dealer would have cost me the equivalent to the pair I paid for at Peugeot Sport with shipping!
Contemplating the GRP A ones as I too am after a little more negative camber just not certain if they will alter the geometry.
| | |
|
|
|
|
| | |
| GTi 180 Obsidian Black
SW 1.6 16v Sahara Yellow | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [156]:
Visitors: 155
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
