|
Author
|
Message |
|
|
 Posted: Wed May 27, 2015 5:57 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 3262
Trade Rating: +18
Location: Plymouth
|
 |
Afternoon guy's, wandering if anyone can help solve an issue I have with the passenger window in my 05 Gti180.
Since I bought her back in 2012 the passenger window has been a bit tempermental when trying to close back up, i.e. when the window is wound right down and you press the switch it seems hesitant about going back up, sometimes have to press+hold the switch for at least 10 seconds before it decides to move.
The drivers window works spotlessly, i'm thinking it might be the actual motor in the passenger door as there are no blockages etc
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Wed May 27, 2015 11:01 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 729
Trade Rating: 0
Location: Norfolk
|
|
My switch plays up
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed May 27, 2015 11:16 am |
|
|
|
|
Joined: Jan 14, 2014
Posts: 758
Trade Rating: +2
Location: London
|
|
Yerp mine to, although not as bad as yours with the delay.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed May 27, 2015 11:19 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 729
Trade Rating: 0
Location: Norfolk
|
|
I took my switch apart. Here was piting where the contact are
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed May 27, 2015 1:22 pm |
|
|
|
|
Joined: Apr 01, 2014
Posts: 668
Trade Rating: 0
Location: Cornwall
|
|
My passenger window doesn't work at all I've changed the switch with no joy .
It's Impossible to just change the motor for the windows so I guess I'll buy a whole door .
Again as I did buy one off eBay . I was sent the wrong door . DOH the connections was wrong . Pre plex against a multiplex don't work .
...
| | |
|
|
|
|
 | |  |
| If it aint broke dont fix it ! | |
 | |  |
|
|
|
|
|
|
|
Posted: Wed May 27, 2015 3:48 pm |
|
|
|
|
Joined: May 25, 2011
Posts: 1025
Trade Rating: +1
Location: south coast
|
|
As said check the contacts on all the wireing could also be worth lubracating the runers with some silicon spray.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed May 27, 2015 6:57 pm |
|
|
|
|
Joined: Feb 09, 2010
Posts: 265
Trade Rating: 0
Location: Mitcham
|
|
The motor could be tired, the wiring in the door hinge should be checked 1st. I've got a good door in KMF Agean blue for sale.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri May 29, 2015 4:04 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 3935
Trade Rating: +84
|
|
| MattyP wrote: |
Afternoon guy's, wandering if anyone can help solve an issue I have with the passenger window in my 05 Gti180.
Since I bought her back in 2012 the passenger window has been a bit tempermental when trying to close back up, i.e. when the window is wound right down and you press the switch it seems hesitant about going back up, sometimes have to press+hold the switch for at least 10 seconds before it decides to move.
The drivers window works spotlessly, i'm thinking it might be the actual motor in the passenger door as there are no blockages etc |
check the Switch with someone else who has a 206 or just buy another, failing that get a multi meter at the window motor to see if the 12v is instandt when the switch is pressed..
tbh i see it as either the window motor or the switch,,
also how hot does the window motor get?
| Project2062014 wrote: |
My passenger window doesn't work at all I've changed the switch with no joy .
It's Impossible to just change the motor for the windows so I guess I'll buy a whole door .
Again as I did buy one off eBay . I was sent the wrong door . DOH the connections was wrong . Pre plex against a multiplex don't work .
... |
Why not take the doorcard off and replace the window regulator, its held in with 5 or 6 rivets, drill them out take out the old regulator and put a new one in.. takes all of about 30 mins to replace it.. I did a how to on it..
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri May 29, 2015 6:12 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 174
Trade Rating: 0
Location: London
|
|
| iainlovatt wrote: |
| MattyP wrote: |
Afternoon guy's, wandering if anyone can help solve an issue I have with the passenger window in my 05 Gti180.
Since I bought her back in 2012 the passenger window has been a bit tempermental when trying to close back up, i.e. when the window is wound right down and you press the switch it seems hesitant about going back up, sometimes have to press+hold the switch for at least 10 seconds before it decides to move.
The drivers window works spotlessly, i'm thinking it might be the actual motor in the passenger door as there are no blockages etc |
check the Switch with someone else who has a 206 or just buy another, failing that get a multi meter at the window motor to see if the 12v is instandt when the switch is pressed..
tbh i see it as either the window motor or the switch,,
also how hot does the window motor get?
| Project2062014 wrote: |
My passenger window doesn't work at all I've changed the switch with no joy .
It's Impossible to just change the motor for the windows so I guess I'll buy a whole door .
Again as I did buy one off eBay . I was sent the wrong door . DOH the connections was wrong . Pre plex against a multiplex don't work .
... |
Why not take the doorcard off and replace the window regulator, its held in with 5 or 6 rivets, drill them out take out the old regulator and put a new one in.. takes all of about 30 mins to replace it.. I did a how to on it.. |
This! only reason to replace the whole door would be if you couldnt get your hands on a rivet gun. even then its abit overkill
| | |
|
|
|
|
| | |
| Black 206 Gti. Soon to be 2.2 | |
| | |
|
|
|
|
|
|
|
Posted: Fri May 29, 2015 1:42 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 494
Trade Rating: +4
Location: Maidstone
|
|
Mine does this as well, again, only on passenger side!
| | |
|
|
|
|
| | |
| Iv had:
1.1 106 - 1.4 206 sport - 206 GTi180 - Subaru impreza wrx - 1.6 206 XSI
Now : GTi 180 again - Build thread | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [92]:
Visitors: 91
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
