|
Author
|
Message |
|
|
 Posted: Thu Mar 01, 2018 8:34 am |
|
|
|
|
Joined: Feb 28, 2018
Posts: 3
Trade Rating: 0
|
 |
Hi can anyone help or as anyone had the same problems I have a Peugeot 206
With a misfire I have replaced the head gasket as it was leaking oil on to the cambelt plus was burning water I have changed the coil pack with a good unit & make replaced plugs had the ecu tested which came back good
Also I have changed the injectors as I got some from a scrape car
I am thinking wireing fault has anyone come across this starting to pull my hair out any help would be great thanks Karl
It’s a 2005 1,4 16v kfw
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Thu Mar 01, 2018 4:20 pm |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
Did you use the correct locking tools for the ET3 engine when you timed up the engine while doing the head gasket / cambelt?
There is also a software update for the engine ecu.
You didn't fit NGK spark plugs i hope.
Have you removed & cleaned the VVT solenoid?
Has it been scanned with Peugeot Planet / Diagbox?
| | |
|
|
|
|
 | |  |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
 | |  |
|
|
|
|
|
|
|
Posted: Fri Mar 02, 2018 11:39 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 2369
Trade Rating: +15
Location: Gloucestershire, UK
|
|
| MrBSI wrote: |
There is also a software update for the engine ecu.
|
Ah, I asked as that seemed to be more of a statement rather than a question - I thought you had some way of finding out! 
| | |
|
|
|
|
Last edited by VorTechS on Fri Mar 02, 2018 2:22 pm; edited 1 time in total
|
|
|
|
|
|
|
Posted: Fri Mar 02, 2018 2:01 pm |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
| VorTechS wrote: |
| MrBSI wrote: |
Did you use the correct locking tools for the ET3 engine when you timed up the engine while doing the head gasket / cambelt?
There is also a software update for the engine ecu.
You didn't fit NGK spark plugs i hope.
Have you removed & cleaned the VVT solenoid?
Has it been scanned with Peugeot Planet / Diagbox? |
How can I find out if there's a software update for the ECU on my 180? |
Ask your Peugeot main dealer to plug it in & check for updates.
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 02, 2018 8:13 pm |
|
|
|
|
Joined: Feb 28, 2018
Posts: 3
Trade Rating: 0
|
|
Hi thanks for reply with the timing I locked the crank & both cams with the locking tools so it can’t be wrong I also did clean the vvti solenoid as I took it out as I had the head skimmed & pressure tested Bosch plugs fitted
Have scanned it & getting injector supply fault which was on launch
But no fault code just that only I have had the injectors out I picked up a second hand rail up with 4 injectors in it from the scrape yard but still the same.but now it won’t start at all I am thinking wireing or earth problem
Has anyone got any ideas thanks karl
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 02, 2018 8:28 pm |
|
|
|
|
Joined: Feb 28, 2018
Posts: 3
Trade Rating: 0
|
|
I also have checked voltage to each injector 2.5 volts to each one can’t seem
To check the earth as such as it goes over to the fuse box I have checked it from the fuse box up to the muti plug for contonewite exuse my spelling shocking
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [137]:
Visitors: 136
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
