|
Author
|
Message |
|
|
 Posted: Sun Jul 25, 2021 7:13 am |
|
|
|
|
Joined: Jul 25, 2021
Posts: 2
Trade Rating: 0
|
 |
Hi
I am new to this forum as I have just bought a 206 for my wife. it is a 2004 with 9000 miles on the clock yes you read right enough an amazing 9000. I do have a couple of problems with it however one is the speedo reading, when reading 30 mph it is actually doing 36mph and the differance goes up with the speed. I have guessed it may be the sensor do you think I am correct?
the other problem is more complicated and is the central locking system. When useing the remote key the locks make a low clicking noise and the lights flash but nothing happens. if I use the key in the lock it will only lock that door. what I also find strange is the curtisy light is on constently when set to come on with the doors and I think may be part of the central locking issue.
I would be gratefull for and input or advice
Jimmy
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Tue Jul 27, 2021 1:31 pm |
|
|
|
|
Joined: May 24, 2021
Posts: 10
Trade Rating: 0
Location: Finland
|
|
Are there any door open warnings on the screen? For example, when going over a bump.
The locks have microswitches and parts that move can wear. In my case the passenger door intermittently showed as open, then just stayed almost always showing as open. I ended up buying a power lock latch mechanism from the wreckers and replacing it. It was a bit of work to remove the door panel. Some contortion involved in figuring out how to get the metal rods off the latch and getting that latch out. Having a good look with a flash light, patience and a few twists in the right way and it comes out.
Also, it is possible to fix the the door latch. www.dclabs.lt/dainiaus/?p=2132
Being a 2004 Model, the door latch should have a 6 pin connector ( older ones DAM 8575 and before have a 9 pin connector).
Not sure, but the hatch /trunk could activate the light too. Anyway, you need to figure out which door it is before proceeding.
Probably find more information if you search "Peugeot door locks bounce"
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jul 27, 2021 8:40 pm |
|
|
|
|
Joined: Jul 25, 2021
Posts: 2
Trade Rating: 0
|
|
thanks for your reply. No there are no warning lights flashing, I had a closer look at the hatch lock and it will lock but not unlock. I checked the wires and got power when locking but no power when unlocking. The problem seems above my head so I will try to get an auto electrician as it could be the bsi unit and going round all the doors will be a lot of work
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Aug 01, 2021 7:48 am |
|
|
|
|
Joined: Jun 30, 2021
Posts: 46
Trade Rating: 0
Location: Eastern Scotland
|
|
Going to make a stupid suggestion here - but worth checking as I've encountered it on other cars. In regards to the speedo issue - are the correct size tyres fitted? Otherwise I'd be looking at the sensor as well!
Good luck with it, that's some incredible mileage! My 04' plate is going on 95k!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 22, 2021 9:02 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2949
Trade Rating: +6
Location: Athens, Greece
|
|
+1 on correct size wheels..
Also, 'could be the wrong size wheels programmed into the BSI after other work on the unit.
| | |
|
|
|
|
 | |  |
| 1.4i, 2001, 3-door, China Blue
Repair safely - Drive safely | |
 | |  |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [196]:
Visitors: 195
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
