|
Author
|
Message |
|
|
 Posted: Mon Jan 17, 2011 1:27 pm |
|
|
|
|
Joined: May 09, 2010
Posts: 58
Trade Rating: +1
Location: Falkirk, Scotland
|
 |
went through a massive deep puddle today, basically a river in the road, it was as high as the door sills, anyway on the way home the car started to lose power and started to sound more like a harley davidson exhaust.
have checked my spark plugs and one of them was soaking wet (water) not sure how it got in there. checked the oil, there's no water in it that i can see, going to get a cylinder pressure test tomorrow, any ieas as to what it could be?
cheers in advance.
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:30 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 305
Trade Rating: 0
Location: London, UK
|
|
Are you sure it's not just your exhaust blowing? Otherwise as you say, check spark plugs and injectors first before anything else.
| | |
|
|
|
|
 | |  |
| Quiksilver: 1.6 16v Engine Conversion. | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:30 pm |
|
|
|
|
Joined: Jan 14, 2011
Posts: 36
Trade Rating: 0
Location: shropshire
|
|
most probaly the wet spark plug, makes the spark track down the wet outside of the plug rather than the core and creating a spark. Could also be a wet dizzy?
| | |
|
|
|
|
| | |
| peugeot 206 2.0 hdi 51 plate | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:37 pm |
|
|
|
|
Joined: Sep 14, 2010
Posts: 358
Trade Rating: +1
Location: llanelli
|
|
dizzy? i wasnt aware the 206 was made in the 50's?
| | |
|
|
|
|
| | |
| 2.0 hdi 90
challenger alloys
-40mm spax shocks and springs
gti 180 calipers, groved discs
braided brake lines
turbo back pro-speed exhaust
de-egr'd | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:38 pm |
|
|
|
|
Joined: May 09, 2010
Posts: 58
Trade Rating: +1
Location: Falkirk, Scotland
|
|
the exhausts fine, its a weird one though because immediately when i start the car, it runs smooth as ever but after like 30 seconds it runs like a bag of s***. not really sure what to check for with the injectorsto be honest, just that they are not chocked? plus ive dried the plug and swapped the all around but still runs the same. whats a wet 'dizzy' sorry ...bit of a newbie to this.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:40 pm |
|
|
|
|
Joined: Sep 14, 2010
Posts: 358
Trade Rating: +1
Location: llanelli
|
|
what id say is to make sure all the connectors are dry, blow them out if neccesary. id then try a new set of plugs and check the compresion because if water has gone into the engine the chances are something is bent in there, be it a valve or a conrod.
| | |
|
|
|
|
| | |
| 2.0 hdi 90
challenger alloys
-40mm spax shocks and springs
gti 180 calipers, groved discs
braided brake lines
turbo back pro-speed exhaust
de-egr'd | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:50 pm |
|
|
|
|
Joined: Jan 14, 2011
Posts: 36
Trade Rating: 0
Location: shropshire
|
|
wont be a bent valve or conrod wouldn't run.
| | |
|
|
|
|
| | |
| peugeot 206 2.0 hdi 51 plate | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 1:51 pm |
|
|
|
|
Joined: Sep 14, 2010
Posts: 358
Trade Rating: +1
Location: llanelli
|
|
it could run with a slightly bent conrod, a fella had it on here with a hdi, aparently it last a week with him before it blew but in all that time it was running like a bag of nails.
| | |
|
|
|
|
| | |
| 2.0 hdi 90
challenger alloys
-40mm spax shocks and springs
gti 180 calipers, groved discs
braided brake lines
turbo back pro-speed exhaust
de-egr'd | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 2:03 pm |
|
|
|
|
Joined: Jan 14, 2011
Posts: 36
Trade Rating: 0
Location: shropshire
|
|
yer, must have been very slightly bent most bends ! see are propper bows
| | |
|
|
|
|
| | |
| peugeot 206 2.0 hdi 51 plate | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 2:07 pm |
|
|
|
|
Joined: Sep 14, 2010
Posts: 358
Trade Rating: +1
Location: llanelli
|
|
water does funny stuff to engines. burnsy- id say you have water in a sensor connector somewhere, id check them all.
| | |
|
|
|
|
| | |
| 2.0 hdi 90
challenger alloys
-40mm spax shocks and springs
gti 180 calipers, groved discs
braided brake lines
turbo back pro-speed exhaust
de-egr'd | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 2:12 pm |
|
|
|
|
Joined: May 09, 2010
Posts: 58
Trade Rating: +1
Location: Falkirk, Scotland
|
|
how do you mean? as in the ones on the coil pack?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 2:18 pm |
|
|
|
|
Joined: Sep 14, 2010
Posts: 358
Trade Rating: +1
Location: llanelli
|
|
ok, im guessing you do not know what is what? with your ignition off take off each connector 1 by 1 blow them out, and then reconect them.
| | |
|
|
|
|
| | |
| 2.0 hdi 90
challenger alloys
-40mm spax shocks and springs
gti 180 calipers, groved discs
braided brake lines
turbo back pro-speed exhaust
de-egr'd | |
| | |
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 2:26 pm |
|
|
|
|
Joined: May 09, 2010
Posts: 58
Trade Rating: +1
Location: Falkirk, Scotland
|
|
lol right no probz ill give that a try, thanks mate, il let you know how i get on.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 3:43 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2719
Trade Rating: +6
Location: UK
|
|
Is there any chance your air intake sucked up water?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2011 5:16 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 840
Trade Rating: +3
Location: Durham, NE England, UK
|
|
| Steve206 wrote: |
| Is there any chance your air intake sucked up water? |
first thing i'd have checked after driving through puddle caused the problem.
Also lots of WD-40 on all sensor plugs etc.
| | |
|
|
|
|
| | |
| Now Driving a 1988 Volvo 360 GLT
2.0 8v RWD
Cheaper to insure than my 1.4 206  | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [154]:
Visitors: 153
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
