|
Author
|
Message |
|
|
 Posted: Sat Apr 02, 2011 12:45 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
 |
Hi All,
Today I fitted a New front Bumper with Fog lights,my car didn't had ones before,so I fitted them today,and connected the plugs which where hooked behind the headlights,and I put a (15) fuse in the fuse box which in located in the engine bay in number (6),then I used the PP2000 to activate them,which I did,and it gave me the fog light light on the speedo,but the foglight didn't went on :(,so I wanna know what goes wrong,even though I tested the fog lights bulbs before I fit them,and they worked fine,so please help me.
Tim
| |  |
|
|
 |
Last edited by Timon2210 on Tue Apr 19, 2011 12:21 pm; edited 1 time in total
|
|
|
|
|
|
|
Posted: Sat Apr 02, 2011 12:47 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
Test to see if the +12v is reaching the fogs, if it is. Then is a earthing problem.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Apr 02, 2011 12:54 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
| Lee wrote: |
| Test to see if the +12v is reaching the fogs, if it is. Then is a earthing problem. |
Thank you so much for your fast reply :),will do that in the morning,because it's dark outside,it's 10:00 PM now :(,and see how it goes,I will keep you posted,thanx 
So if it was an earthign problem,should I check the earthing points located under the headlights on (L+R)??
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Apr 02, 2011 12:55 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
Yeah just get the earthing points, or run new earth wires.
The earths on the fogs are pretty s**te tbh
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Apr 02, 2011 12:58 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 2379
Trade Rating: +6
Location: Finding Dr. Robotnik
|
|
Think this has happened to mine. My car had working fogs before but now changed the front bumper and one side is now not working! Pain in the ass.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Apr 02, 2011 1:23 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
| Lee wrote: |
| Test to see if the +12v is reaching the fogs, if it is. Then is a earthing problem. |
Well you didn't mention the other side of the problem,which is "What if there is no +12v feed reaching the fogs??is there is a relay that I need to check,or they don't need relay??
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 4:22 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
well I took the fogs plugs out,and I check by the voltmeter,but there is no +12v,it shows zero :(,so what can I do next??
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 4:26 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2248
Trade Rating: +18
Location: Leicester
|
|
you say you used the loom from behind the headlights? Would this not be the other headlight loom that is in most 206s for either h4/h7 connectors? And not for fogs?
| | |
|
|
|
|
 | |  |
| NO LONGER ACTIVE ON THE FORUM | |
 | |  |
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 4:29 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
2006 should have crystals as standard, so the h7 will be in use.
So the spare one should be the 2 pin, grey connector for the fogs.
Test to see if power is reaching the fuse like I said.
Could always check the amps when you turn the fogs on, to see if it changes.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 5:15 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 3828
Trade Rating: +32
|
|
| mattievrs wrote: |
| you say you used the loom from behind the headlights? Would this not be the other headlight loom that is in most 206s for either h4/h7 connectors? And not for fogs? |
This
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 5:27 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 5574
Trade Rating: +11
Location: UK
|
|
But the looms behind the headlights couldnt reach down to the fogs could they?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 8:12 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
| mattievrs wrote: |
| you say you used the loom from behind the headlights? Would this not be the other headlight loom that is in most 206s for either h4/h7 connectors? And not for fogs? |
| Lee wrote: |
2006 should have crystals as standard, so the h7 will be in use.
So the spare one should be the 2 pin, grey connector for the fogs.
Test to see if power is reaching the fuse like I said.
Could always check the amps when you turn the fogs on, to see if it changes. |
As Lee said,I have H7 headlights,and I have the Grey plugs ready in the loom for foglights,and it's 2 Pin and fitted 100% on the fogs.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 8:14 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
| DJ- wrote: |
| But the looms behind the headlights couldnt reach down to the fogs could they? |
They reached down the fogs very well,it's made for that purpose,I will post pics soon
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 8:27 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 5574
Trade Rating: +11
Location: UK
|
|
| Timon2210 wrote: |
| DJ- wrote: |
| But the looms behind the headlights couldnt reach down to the fogs could they? |
They reached down the fogs very well,it's made for that purpose,I will post pics soon |
no i mean the headlight looms could surely not reach to the fogs?? well mine dont!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Apr 03, 2011 8:36 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
| DJ- wrote: |
| Timon2210 wrote: |
| DJ- wrote: |
| But the looms behind the headlights couldnt reach down to the fogs could they? |
They reached down the fogs very well,it's made for that purpose,I will post pics soon |
no i mean the headlight looms could surely not reach to the fogs?? well mine dont! |
Headlight looms are plugged into the headlamps 
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [249]:
Visitors: 248
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
