|
Author
|
Message |
|
|
 Posted: Tue May 21, 2013 4:08 pm |
|
|
|
|
Joined: Apr 27, 2013
Posts: 7
Trade Rating: 0
|
 |
Hi
Just had a diagnostic check on my non starting 2003 sw, it came up with crankshaft sensor fault. Any idea how to locate the sensor or what it looks like, my haynes manual only covers the larger diesel motors.
Thanks in advance
Wayne
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Thu May 23, 2013 1:55 am |
|
|
|
|
Joined: Apr 27, 2013
Posts: 7
Trade Rating: 0
|
|
In reply to my own question, and to assist anyone else struggling to fix their car themselves, the crank sensor is under the bottom pulley. A mechanic with an autodata cd told me it was on the back of the block pointing in towards the flywheel on the gearbox end.
Anyway, removed the plug for the cps and found pin no3 in the plug corroded with verdi gris. Cleaned it up and the car started immediately. It looks like the bottom crank pulley needs removing to change the sensor out.. can anyone confirm that?
Cheers
Wayne
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri May 24, 2013 4:25 am |
|
|
|
|
Joined: Feb 16, 2010
Posts: 440
Trade Rating: +2
Location: Devon
|
|
ive done mine before and yes the lower C/S pulley has to come off. you can get away with removing the lower cover bolts and prising the cover off just enough to take the sensor right out. (held in with a 10mm bolt)
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 19, 2021 4:24 pm |
|
|
|
|
Joined: Jan 18, 2021
Posts: 3
Trade Rating: 0
|
|
Hi im having the same problem on my 1.4 hdi 206 sensor will come out so far cant get past bottom pulley for it to come out have i got to put anything in the fly wheel to stop engine moving when taking pulley off and aux belt regards mark
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 19, 2021 4:29 pm |
|
|
|
|
Joined: Feb 16, 2010
Posts: 440
Trade Rating: +2
Location: Devon
|
|
you won't get it past the bottom pulley so that has to be removed.
you dont need to pin the flywheel. the pulley is on a key way.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 19, 2021 6:38 pm |
|
|
|
|
Joined: Jun 19, 2010
Posts: 1600
Trade Rating: +4
Location: South Bucks
|
|
Check the pulley when it is off .. it's a two piece unit with a rubber damper ring and when that ring goes the pulley will clonk and wobble ...
| | |
|
|
|
|
 | |  |
| Down to just the 1.4 HDi. Cayman Green 2.0i CC sold. | |
 | |  |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [219]:
Visitors: 218
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
