|
Author
|
Message |
|
|
 Posted: Mon Aug 13, 2012 2:37 pm |
|
|
|
|
Joined: Jan 05, 2012
Posts: 31
Trade Rating: 0
Location: london
|
 |
Hi there, long time reader but first time poster
Im having problems with my 55 reg 206 1.1 sport which doesnt seem to turn over. When I switch the ignition, the wipers randomly start up, the lights automatically come on, and the dahs gives me random lights. WHen I go to start up the car, it trys to turn on but the rev counter only goes up a little. Prior to the issue, I have recently installed a new head unit and subwoofer. When I fitted the headunit, I found that two wires needed to be switched. When I cut and reconnected the wires, the dashboard will light up and start buzzing at me. When I went to switch the wires back to normal, the problem started. WHat have I done wrong?? Should I connect the stock headunit again?? Thanks
| |  |
|
|
 |
 | |  |
| OLD: 206 Sport 1.1 55 Plate with a whooping 60BHP!!! xDDD
Currently Driving: 206 Quiksilver 1.6 16v 53 Plate 110BHP | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 2:40 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
did you not disconnect the battery before you wire up your sub and headunit?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 2:45 pm |
|
|
|
|
Joined: Jan 29, 2011
Posts: 6526
Trade Rating: +10
Location: Westhoughton, Lancashire
|
|
Did you not disconnect the battery before replacing the headunit?
First rule with any electrical work on a 206 is disconnect the battery to avoid frying the BSI.
Try a BSI reset (you'll find details if you do a search) and if that doesn't work then start looking at fuses before going down the expensive route of having the BSI replaced.
BTW, welcome to the site, looks like you've been leeching from it since January and only communicating with us when something goes wrong.
Edit. Seabook, you beat me to it.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 2:51 pm |
|
|
|
|
Joined: Jan 05, 2012
Posts: 31
Trade Rating: 0
Location: london
|
|
I did disconnect the battery whilst doing the subwoofer, but... not the radio >.< I shall have to try a BSI reset in the morning. Then I shall check the fuses. This site I just wonderful!! I dont know a lot about 206's so I dont want to give false advice to others lol. Only just recently started driving tbh. Thanks for your suggestions
| | |
|
|
|
|
| | |
| OLD: 206 Sport 1.1 55 Plate with a whooping 60BHP!!! xDDD
Currently Driving: 206 Quiksilver 1.6 16v 53 Plate 110BHP | |
| | |
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 2:55 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
make sure you disconnect the battery before you check the fuse....
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 3:05 pm |
|
|
|
|
Joined: Jan 05, 2012
Posts: 31
Trade Rating: 0
Location: london
|
|
will do, will report back with results tomoz, night
| | |
|
|
|
|
| | |
| OLD: 206 Sport 1.1 55 Plate with a whooping 60BHP!!! xDDD
Currently Driving: 206 Quiksilver 1.6 16v 53 Plate 110BHP | |
| | |
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 3:57 pm |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
Whats the betting the VAN wire to the back of the radio has been fiddled with thinking its + volt supply 
There is NO NEED to cut wires on a 206 to install an aftermarket radio.
Hope you havent sent +12 volts down the VAN wire as if you have it will have likely fried the BSI unit.
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
|
|
Posted: Mon Aug 13, 2012 10:33 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
| MrBSI wrote: |
Whats the betting the VAN wire to the back of the radio has been fiddled with thinking its + volt supply
There is NO NEED to cut wires on a 206 to install an aftermarket radio.
Hope you havent sent +12 volts down the VAN wire as if you have it will have likely fried the BSI unit. |
 ,that is why if you don't know how to do a DIY job,take it for someone who know what he is doing,a garage or a friend,instead of causing you a problem that might cost you x10 his labor
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Aug 14, 2012 9:26 am |
|
|
|
|
Joined: Jan 05, 2012
Posts: 31
Trade Rating: 0
Location: london
|
|
UPDATE:
I tried the BSI reset but still nothing. I also checked all the fuses and they seem intact. I reckon the BSI is dead  I'll upload a video and some pictures later on to give a clear image of what is happening.
I read online somewhere that you need to swap the ignition and live wire so that the radio will store the settings :S
| | |
|
|
|
|
| | |
| OLD: 206 Sport 1.1 55 Plate with a whooping 60BHP!!! xDDD
Currently Driving: 206 Quiksilver 1.6 16v 53 Plate 110BHP | |
| | |
|
|
|
|
|
|
|
Posted: Tue Aug 14, 2012 10:15 am |
|
|
|
|
Joined: Jan 29, 2011
Posts: 6526
Trade Rating: +10
Location: Westhoughton, Lancashire
|
|
I'm sure Peugeot will be happy to relieve your wallet of around £600 to sort it out for you.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Aug 14, 2012 4:00 pm |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
| nonamecc79 wrote: |
UPDATE:
I tried the BSI reset but still nothing. I also checked all the fuses and they seem intact. I reckon the BSI is dead I'll upload a video and some pictures later on to give a clear image of what is happening.
I read online somewhere that you need to swap the ignition and live wire so that the radio will store the settings :S |
I'd just pay the £8.98 for the multiplexed aftermarket radio adaptor harness as it's a much safer option.
Available from any Peugeot / Citroen main dealer 
If you have fiddled with wire numbers XE24, 9004 or 9005 then you have likely damaged the BSI unit as these are the VAN wires ( Vehicle Area Network )
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
|
|
Posted: Wed Aug 15, 2012 5:10 am |
|
|
|
|
Joined: Jan 05, 2012
Posts: 31
Trade Rating: 0
Location: london
|
|
I cut the blue and red wires :S My blue remote cable for the subwoofer was connected to the blue wire as well. I think it was the switched 12v wire
| | |
|
|
|
|
| | |
| OLD: 206 Sport 1.1 55 Plate with a whooping 60BHP!!! xDDD
Currently Driving: 206 Quiksilver 1.6 16v 53 Plate 110BHP | |
| | |
|
|
|
|
|
|
|
Posted: Wed Aug 15, 2012 5:15 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
| nonamecc79 wrote: |
| I cut the blue and red wires :S My blue remote cable for the subwoofer was connected to the blue wire as well. I think it was the switched 12v wire |
Peugeot / Citroen wiring doesnt work by colours apart from green / yellow for earth.
PSA Peugeot / Citroen use codes printed on the wires.
Look at the wires you cut & there will be a alphanumeric code printed on them every few inches
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
|
|
Posted: Wed Aug 15, 2012 5:29 am |
|
|
|
|
Joined: Jun 12, 2011
Posts: 457
Trade Rating: +7
Location: Hertfordshire
|
|
sounds like the bsi is proper shagged 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Aug 15, 2012 5:47 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
1) Solder & heatshrink the wires back together.
2) Check with a multimeter ALL the BSI fuses are intact / not blown.
3) Check ALL the fuses in the BM34 underbonnet fusebox in the same way.
4) Reboot the BSI unit correctly.
If it's still dead then remove the BSI unit & either replace it with a VIRGIN / NEW unit OR send the original of for repair & BE HONEST about what you have done to it to kill it!
BBA Reman can test / repair BSI units
www.bba-reman.com/uk/index.aspx
A new BSI unit from Peugeot is £339.77 PLUS whatever the labour charge is to configure it to the car ( at least an hours labour charge )
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [59]:
Visitors: 58
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
