|
Author
|
Message |
|
|
 Posted: Sat Sep 08, 2012 2:40 pm |
|
|
|
|
Joined: Sep 08, 2012
Posts: 1
Trade Rating: 0
|
 |
Hi guys, just thought I'd post to the forums since you all obviously know a lot more specifically about 206's than the answers I find on Google which are more generalised. Anyway, I bought a 1.4 Petrol LX last year. Recently it started making an odd tinny rattle.
Location
I think it comes from anywhere between the middle and the front of the car. I can't pinpoint whether it's nearside or farside so I'm guessing it must be somewhere midway (in terms of width).
Typical Experience
- I'm in gear but the throttle is closed (one slight bit of pressure on the throttle removes the noise. Weird, eh?)
- Can be heard very very faintly while coasting.
- When I'm in revving the car in neutral, a tinny rattle seems to crop up at about the 20k-25k RPM mark but no higher and no lower.
Notes
I should probably mention that performance doesn't suffer whatsoever. Turning either direction doesn't make a difference. It's not unbearably loud but it's bloody annoying.
Conclusion
Most of you will be aware of what I suspect but I'd rather not say yet until I hear your completely fresh opinions. Any help would be appreciated a lot!!! 
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Sat Sep 08, 2012 4:22 pm |
|
|
|
|
Joined: Feb 24, 2010
Posts: 2596
Trade Rating: +17
Location: North West Wales
|
|
If its there when not on the throttle sounds likeit could be the diff bearing on the way out.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Sep 09, 2012 12:35 pm |
|
|
|
|
Joined: Jul 30, 2012
Posts: 28
Trade Rating: 0
Location: Blackpool
|
|
With it only happening between 2k - 2.5k RPM whilst not in gear its is probably something resonating. I'd check the exhaust myself, sounds like its rattling against the heat shield. It would also explain why it disappears whilst under load while driving as the engine changes position slightly due to rubber mounts.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Sep 09, 2012 5:24 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2949
Trade Rating: +6
Location: Athens, Greece
|
|
Check the exhaust mid-section pipe to cat pipe with the springs. Tighten them up and see if it makes a difference.
If so, there is a ring between the join which just disintigrates and causes this and loads of other effects too by lossening that join and leaking as well.
| | |
|
|
|
|
 | |  |
| 1.4i, 2001, 3-door, China Blue
Repair safely - Drive safely | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Sep 10, 2012 7:16 am |
|
|
|
|
Joined: Aug 20, 2012
Posts: 8
Trade Rating: 0
|
|
Yeah, I'd say exhaust too. Possibly the innards of the CAT having a bit of fun....
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Sep 10, 2012 7:27 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2632
Trade Rating: +6
Location: Rugby,Warwickshire
|
|
Get a exhaust place to look at it, could be the famous manifold rattle, heat shield, exhaust clamps or hangers.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Sep 10, 2012 9:44 am |
|
|
|
|
Joined: Nov 20, 2011
Posts: 153
Trade Rating: 0
Location: Croydon
|
|
Probably front exhaust clamp, at least that is what mine turned out to be 
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [55]:
Visitors: 54
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
