|
Author
|
Message |
|
|
 Posted: Sun Feb 10, 2013 2:02 pm |
|
|
|
|
Joined: Feb 10, 2013
Posts: 4
Trade Rating: 0
|
 |
Fitted new cambelt and water pump on saturday but since then its right down on power and cuts out if you floor it then back off the throttle
any ideas?
| |  |
|
|
 |
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:03 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4014
Trade Rating: +2
|
|
Badly fitted cam belt, id you use all the correct locking tools?
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:07 pm |
|
|
|
|
Joined: Feb 23, 2011
Posts: 1211
Trade Rating: +1
Location: sarcasm-in-shedloads
|
|
Incorrectly timing?
Slack belt?
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:09 pm |
|
|
|
|
Joined: Feb 10, 2013
Posts: 4
Trade Rating: 0
|
|
all correct tools used found it very hard to time it up couldnt find it autodata books
my engine code is rfk
but for that in the books it a 4 bolt bottom pulley but mines a 1 bolt floater
the only way we could get it to time up was to a 2.2 406 coupe
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:11 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4014
Trade Rating: +2
|
|
If you've lost power after doing the belt the timing will be out.
I cant elaborate on how to get the timing correct other than take it to Peugeot or a french car specialist.
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:33 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 898
Trade Rating: +5
Location: Melton Mowbray Leicestershire
|
|
Just looked at autodata, what position where the camshafts locked off at (position of locking tools) See the two photos attached to see the difference.
406 2.2
180
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:39 pm |
|
|
|
|
Joined: Feb 10, 2013
Posts: 4
Trade Rating: 0
|
|
it was very strange would lock off to both but soon as you tried turning it over after doing it at the 180 it would lock up on number 1 on inlet but then done it to the 2.2 and it worked i had a couple of experienced mechanics look at it and they were baffled at it
is there anyone in the south that has vast experience on doing these that could just take a look?
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:42 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4014
Trade Rating: +2
|
|
| samfrygti180 wrote: |
it was very strange would lock off to both but soon as you tried turning it over after doing it at the 180 it would lock up on number 1 on inlet but then done it to the 2.2 and it worked i had a couple of experienced mechanics look at it and they were baffled at it
is there anyone in the south that has vast experience on doing these that could just take a look? |
The south where mate, its quite a big area lol.
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 2:49 pm |
|
|
|
|
Joined: Feb 10, 2013
Posts: 4
Trade Rating: 0
|
|
Bournemouth lol.
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 4:00 pm |
|
|
|
|
Joined: Nov 28, 2011
Posts: 411
Trade Rating: +1
Location: sunny stoke
|
|
Its timed up wrong, i recall what people call a floating crank so if you dont know what you are doing then you in the tom tit!
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 10, 2013 4:16 pm |
|
|
|
|
Joined: May 25, 2011
Posts: 1025
Trade Rating: +1
Location: south coast
|
|
problem is its not so easy to "just take a look" really you need to strip it all back down and start again so as you know this is not a 5min job on the 180's.
| | |
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Feb 11, 2013 11:03 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
| samfrygti180 wrote: |
Fitted new cambelt and water pump on saturday but since then its right down on power and cuts out if you floor it then back off the throttle
any ideas? |
Yes, your out of your depth & haven't got a clue what your doing 
Also the phrase " All the gear & no idea " springs to mind.
| | |
|
|
|
|
 | |  |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
 | |  |
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17140
Online Now [158]:
Visitors: 157
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
