|
Author
|
Message |
|
|
 Posted: Sat Feb 23, 2013 1:58 pm |
|
|
|
|
Joined: Oct 10, 2012
Posts: 1917
Trade Rating: +13
Location: Spalding
|
 |
I have had a lot of good advice and help from people on the site. I wanted to be able to give some help back....
For the last few weeks I have had an intermittent hollow distant metallic knocking / rattling sound. It was very different to any suspension knock I have ever heard.
When in the car it sounded like it was coming from behind the steering wheel / speedo area of the dash.
I checked all trim etc in the car and could not find a solution.
I then started to check through the engine bay. I checked the pollen filter coolant reservoir etc.
It turned out to be the black metal tray that the ECU is bolted to. It is fitted to the car with a bolt at the front right and two metal pins on the left of the tray that are seated into two holes in the engine bay / drivers wing.
I am unsure if these should have rubbers on but mine did not. I have taped the pins so they fit snug in the holes, and refitted the tray.
The sound is now completely gone.
I hope this helps someone else, as having a rattle or knock you can't locate can drive you mad!
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Sat Feb 23, 2013 2:12 pm |
|
|
|
|
Joined: Feb 10, 2010
Posts: 494
Trade Rating: +4
Location: Maidstone
|
|
maybe thats what my rattle noise is. mine seems to only do it at certain revs though.
| | |
|
|
|
|
 | |  |
| Iv had:
1.1 106 - 1.4 206 sport - 206 GTi180 - Subaru impreza wrx - 1.6 206 XSI
Now : GTi 180 again - Build thread | |
 | |  |
|
|
|
|
|
|
|
Posted: Sat Feb 23, 2013 2:26 pm |
|
|
|
|
Joined: Oct 10, 2012
Posts: 1917
Trade Rating: +13
Location: Spalding
|
|
Mine was intermittent. It's worth checking just tap the case on top of the ECU to test. You will hear straight away of it is knocking.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 24, 2013 5:24 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2949
Trade Rating: +6
Location: Athens, Greece
|
|
Yes it's meant to have rubber grommets at the holes in the chassis.
Good job.
| | |
|
|
|
|
| | |
| 1.4i, 2001, 3-door, China Blue
Repair safely - Drive safely | |
| | |
|
|
|
|
|
|
|
Posted: Sun Feb 24, 2013 5:29 am |
|
|
|
|
Joined: Oct 10, 2012
Posts: 1917
Trade Rating: +13
Location: Spalding
|
|
| V9977 wrote: |
Yes it's meant to have rubber grommets at the holes in the chassis.
Good job. |
I thought so. Stupid design if not! 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jul 09, 2013 5:22 am |
|
|
|
|
Joined: Mar 05, 2012
Posts: 4
Trade Rating: 0
Location: Adelaide, Australia
|
|
with this rattle, did it go away if you put your hand on the dash close to the window?
I have a rattle in the same area, however mine stops when I put my hand on the dash, or hit it really hard
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jul 09, 2013 6:13 am |
|
|
|
|
Joined: Oct 10, 2012
Posts: 1917
Trade Rating: +13
Location: Spalding
|
|
No. Mine was intermittent and sounded very metallic. Check your a pillar is not loose? Also check the fuse cover and tray are locked in place. Another good thing to check is the ring that holds the comms has not come loose.
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [398]:
Visitors: 397
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
