|
Author
|
Message |
|
|
 Posted: Thu Oct 03, 2013 4:32 am |
|
|
|
|
Joined: Jan 31, 2013
Posts: 91
Trade Rating: 0
Location: Ledbury, Herefordshire
|
 |
Hi Guys, looking for a little advice regarding dampers. The car has been lowered front & rear but still on standard oil oem shocks. Im sure it won't surprise anyone that they just don't provide anywhere near enough damping. . .and now they're leaking so time for replacements!
However, Im not looking to race or rally my car. .ever (1.6 16v Quicksilver) just wont it to feel sportier than that standard.
Wondered if anyone knew the difference between or had first had experience of these dampers?
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 4:38 am |
|
|
|
|
Joined: Feb 23, 2011
Posts: 1211
Trade Rating: +1
Location: sarcasm-in-shedloads
|
|
B4 replaces the standard set-up, B6 is more sporty/harsher than standard shocks (they are shorter to reduce the ride height) [as far as I can remember]
Mine were on my '02 GTi - eventually had Spax for ride comfort
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 4:41 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 1676
Trade Rating: +46
Location: durham
|
|
yer b4 buddy unles you intend to do some track days ect
| | |
|
|
|
|
|
WARNING: This User Has Had Bad Trade Feedback In The Past
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 4:51 am |
|
|
|
|
Joined: Jan 31, 2013
Posts: 91
Trade Rating: 0
Location: Ledbury, Herefordshire
|
|
Brilliant thanks guys! Are the b4's suitable for lowering springs? Are the b6 rear shocks shorter than the OEM or am I being a pleb & reading to literally? Or do b6's have less 'travel'?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 5:51 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 108
Trade Rating: 0
Location: Pula , Croatia
|
|
B4 - Standard gas pressure shock absorbers.
B6 - Sports settings gas shock absorbers for use with standard springs.
B8 - Shortened gas shock absorbers for use with shortened springs.
| | |
|
|
|
|
 | |  |
| Peugeot 206 1.6 HDI - Gris Aluminium | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 6:44 am |
|
|
|
|
Joined: Jan 31, 2013
Posts: 91
Trade Rating: 0
Location: Ledbury, Herefordshire
|
|
Brilliant! Thanks for the help - much appreciated!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 11:19 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 5400
Trade Rating: +105
Location: Stafford
|
|
B4s are OEM spec but 10% stiffer so suitable for up to 40/45mm springs but don't expect huge amounts of improved handling over standard just from the shocks.
Rears aren't shortened, just stiffer.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 11:45 am |
|
|
|
|
Joined: Jan 31, 2013
Posts: 91
Trade Rating: 0
Location: Ledbury, Herefordshire
|
|
Harry, when you talk about the rears. . .is that the general rule with all the rear dampers? Their physical length are all the same? Just varying rates of stiffness?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Oct 03, 2013 4:26 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 5400
Trade Rating: +105
Location: Stafford
|
|
I've never come across any with shortened pistons - they may exists but may have to be a custom spec.
It's probably because the ride height isn't an identical reduction like the front - for every 10mm lowered it reduces the shock mounting point distance by around 2.5 so at 40mm it's only going to be 10mm less unlike the front would be 40mm shorter. That's my theory anyway.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Oct 04, 2013 12:05 pm |
|
|
|
|
Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon
|
|
No one has asked neither have you told us what spring rates you have fitted. The most important thing with dampers is that they are matched to the spring rate. If your dampers are too stiff they will do what the spring should and the ride will be horrible as well as risking "jack up" or suspension bottoming from "jack down."
Alterantively, if the dampers are not stiff enough then they will not control rebound or bounce and your car will be behave like a pogo stick.
There is almost nothing worse than a mismatched set of dampers and springs - it is definitely NOT just about ride height.
| | |
|
|
|
|
| | |
| Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm)
Why isn't my daughter an Alfaholic? | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [336]:
Visitors: 335
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
york 16,3
