|
Author
|
Message |
|
|
 Posted: Thu Feb 27, 2014 4:02 pm |
|
|
|
|
Joined: Jan 10, 2014
Posts: 18
Trade Rating: 0
|
 |
Hi,
As mentioned in my other two threads, I've been having problems with my 206 1999.
Firstly, it's been pulling to the left since I've had it and I've had two different garages track it only slightly improving it. The tyres were also checked and are fine. I'm getting more and more frustrated with it and I've even had to get a second opinion on the tracking from another garage. All the suspension was checked and everything else.
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Thu Feb 27, 2014 4:10 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
It will probably be a tyre having more drag than the other
Swap the wheels front to back, see what happens. Are the front tyres budget or branded? Are the tread depths similar on both? Are the tyre pressures correct?
| | |
|
|
|
|
 | |  |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Feb 27, 2014 4:32 pm |
|
|
|
|
Joined: Jan 10, 2014
Posts: 18
Trade Rating: 0
|
|
Pressures were checked and fine. They're branded, all new tyres. EDIT - Rear tyres are different from front ones. Front tyres are different brands but are the same.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 27, 2014 4:45 pm |
|
|
|
|
Joined: Jul 08, 2013
Posts: 15
Trade Rating: 0
Location: Northampton
|
|
Is one of your front tyres a directional and the other not? This caused the same issue when i first got mine butfore i changed them.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 27, 2014 4:47 pm |
|
|
|
|
Joined: Jan 10, 2014
Posts: 18
Trade Rating: 0
|
|
| durnfordb wrote: |
| Is one of your front tyres a directional and the other not? This caused the same issue when i first got mine butfore i changed them. |
Not too sure, how would I find that out?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 27, 2014 4:51 pm |
|
|
|
|
Joined: Jul 08, 2013
Posts: 15
Trade Rating: 0
Location: Northampton
|
|
There will be an arrow on the side-wall pointing one way with the word 'rotation'.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Feb 28, 2014 8:49 am |
|
|
|
|
Joined: Feb 16, 2010
Posts: 440
Trade Rating: +2
Location: Devon
|
|
haven't got a caliper binding have you?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Feb 28, 2014 9:00 am |
|
|
|
|
Joined: Feb 25, 2013
Posts: 7
Trade Rating: +2
Location: Hull
|
|
you can get it 4 wheel alignment they will line up the front wheels to the rear axle. did it to mine spot on now
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Feb 28, 2014 12:11 pm |
|
|
|
|
Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon
|
|
There can be a number of possibilities:
Dragging brake (front or rear.)
Mismatched wishbones; these can be in good condition but wrong or poorly manufactured ones fitted that are different shaopes between sides(it has happened.)
Failing rear suspension or trailing arm bushes (a more frequent cause than you would expect.)
Is it pulling to the left or just steering wheel is off-centred (some people mistake one for the other.)
Poor rear geometry that is not being compensated for when setting the front (while 2 wheel alignment equipment used properly can cope with this almost no garage uses the full kit when tracking) get a full four wheel alignment done, get the print out and post it here.
Soft (under inflated) tyre - have to be damned soft to cause pulling though.
Gearbox / final drive problem (very unlikely but has happened.)
Poorly repaired crash damage and subframe or mountings misaligned.
4 wheel alignment done well should spot most of the possible causes though do have them check for buckled wheel or other obvious damage first. The centres are trained to do this before doing alignment but most operators get lazy and don't bother. A buckle wheel will give eronious readings because most equipment clamps to the outer rim of the wheel and if it is fixed at the worst point in the buckle you are correcting for the buckle and not general vehicle alignment.
Also stroke the centres managers ego - tell them no one else could fix it and they are your last hope befrore scrapping the car. Men love having their ego stroked and being given a challenge - it works wonders.
| | |
|
|
|
|
| | |
| Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm)
Why isn't my daughter an Alfaholic? | |
| | |
|
|
|
|
|
|
|
Posted: Mon Mar 10, 2014 9:33 am |
|
|
|
|
Joined: Jan 06, 2013
Posts: 8
Trade Rating: 0
Location: Lancaster, Lancashire
|
|
I had this problem, i tried the above but it all came down to the wishbones, i had replaced both and it pulled to one side, but i changed them again, all fine. the rubber in the bones are to fault.
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [224]:
Visitors: 223
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
