|
Author
|
Message |
|
|
 Posted: Fri Jan 30, 2015 1:15 pm |
|
|
|
|
Joined: Sep 18, 2014
Posts: 11
Trade Rating: 0
|
 |
Hi folks, hope someone can shed some light on this problem.
I was doing 50mph, and then a knocking, like duga, duga, duga ( yeah I know) started coming from the rear of the car. At lower or higher speeds the noise goes away. Also going over potholes or bumps in the raod the car feels like it's hitting harder than before.
Anyone know what this is?
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Fri Jan 30, 2015 1:27 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 898
Trade Rating: +5
Location: Melton Mowbray Leicestershire
|
|
I would do the following:
Check wheel bolts still tight
Check spare wheel cage is nice and tight.
Jack the rear of the car up grab the wheel at the sides and shake the wheel feeling for any play, then do the same for top and bottom. If you can feel play get someone to do it while you watch for where the play is.
If no play then have a look at the shock absorber or signs of failure (fluid filled will be wet with oil). Get a lever bar underneath the wheel and the floor and pull up on the lever moving the wheel up and check for movement (wants to be nice and smooth with no sudden movement either when moving up or down.
Check the rear axle mounting bushes for excessive movement when doing the above checks.
Try them for now and let us know how you get on.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Jan 30, 2015 3:30 pm |
|
|
|
|
Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon
|
|
The obvious is a very soft or flat tyre.
Or a soft tyre with bulge in the side wall.
| | |
|
|
|
|
 | |  |
| Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm)
Why isn't my daughter an Alfaholic? | |
 | |  |
|
|
|
|
|
|
|
Posted: Fri Jan 30, 2015 4:28 pm |
|
|
|
|
Joined: Sep 18, 2014
Posts: 11
Trade Rating: 0
|
|
first thing I did was chaeck the tyres, not them. I'll start checking tomorrow, cheers.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jan 31, 2015 4:24 am |
|
|
|
|
Joined: Apr 01, 2014
Posts: 668
Trade Rating: 0
Location: Cornwall
|
|
So its .. probably . Exhaust hitting torsion bar or rear shock or the BEARINGS have gone in the axle & it goes duga duga duga .
| | |
|
|
|
|
| | |
| If it aint broke dont fix it ! | |
| | |
|
|
|
|
|
|
|
Posted: Sat Jan 31, 2015 4:29 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 3085
Trade Rating: +12
Location: Essex
|
|
Take the rear wheels off and check the bolt in the anti-roll bar end plate, its a 13mm head I think, I get these come loose all the time on the rally car and it makes a "kerplunk" sound over bumps 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jan 31, 2015 6:03 am |
|
|
|
|
Joined: Sep 18, 2014
Posts: 11
Trade Rating: 0
|
|
Took it to Halfords, it's knackered. It needs a new rear axle. Balls.
I'm guessing it's daft to drive it?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jan 31, 2015 11:37 am |
|
|
|
|
Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon
|
|
I am not sure I would use Halfords to diagnose anything but a rear axle is quite hard to get wrong.
I have seen the rear axles in very poor condition and still being driven but I could not recommend that.
What car is it and where do you live. There are a few places that sell fully reconditioned axles and if you are near a member here who is prepared to do the work for you (probably that will be much cheaper than a garage or Halfords) the full job may be cheaper than you think. More and more the cost of an axle is beginning to mean people deciding to scrap the car though that does depend on exactly what model, what age and condition of the car.
| | |
|
|
|
|
| | |
| Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm)
Why isn't my daughter an Alfaholic? | |
| | |
|
|
|
|
|
|
|
Posted: Mon Feb 02, 2015 4:30 am |
|
|
|
|
Joined: Sep 18, 2014
Posts: 11
Trade Rating: 0
|
|
I have a 2005 1.4S 206. It's in decent condition apart from this.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Feb 02, 2015 8:11 am |
|
|
|
|
Joined: Nov 19, 2014
Posts: 79
Trade Rating: 0
|
|
| kandlbarrett wrote: |
| (probably that will be much cheaper than a garage or Halfords) |
Lol Classic getting an Axle fitted at Halfords! Especially as Im picturing it being one of those halfords at retail parks that sell bicycles etc, great! I wouldn't trust them to fit a light bulb!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Feb 03, 2015 2:25 am |
|
|
|
|
Joined: Sep 18, 2014
Posts: 11
Trade Rating: 0
|
|
| Spotfist wrote: |
| kandlbarrett wrote: |
| (probably that will be much cheaper than a garage or Halfords) |
Lol Classic getting an Axle fitted at Halfords! Especially as Im picturing it being one of those halfords at retail parks that sell bicycles etc, great! I wouldn't trust them to fit a light bulb! |
There was no way Halfords were ever going to do the job. It was a Saturday. Usual guy I use was not open, and at least they could tell me if it was dangerous or not.
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [427]:
Visitors: 426
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
