|
Author
|
Message |
|
|
 Posted: Tue Mar 31, 2015 12:59 pm |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
 |
So I got a new pioneer stereo today and already have the adapter for the wiring loom but for some reason it wont save any of the settings and asks for setup every time I start the car, also it wont switch to the usb/aux setting, ive been told all I have to do is swap the red and yellow wires over but im not too sure. Apart from that its working fine, just kinda want to avoid taking it to halfrauds, also im not to sure how to get the audio control stalk wired up too so any help will be much appreciated. Thanks
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Tue Mar 31, 2015 1:45 pm |
|
|
|
|
Joined: Jul 13, 2010
Posts: 1032
Trade Rating: +10
Location: sutton surrey/welwyn garden city
|
|
You do need to swap the red and yellow wires, not to sure about the aux/usb. You might have to turn it on in the settings
| | |
|
|
|
|
 | |  |
| You never really learn to swear until you learn to drive | |
 | |  |
|
|
|
|
|
|
|
Posted: Tue Mar 31, 2015 3:40 pm |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
Thanks mate, swapped the red a yellow which were on bullets so that was one job made easier and now its good.
I've been a bit of a doughnut, my old pioneer I had to press the source button to get to USB but my new one has a I-pod button so ive been pressing that like a mad man trying to get it to work and didn't even think about pressing the source button to get to the USB mode haha so I'll give that a go in the morning when I go out.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Mar 31, 2015 6:06 pm |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
Sorry for the double post, it would not let me edit my post from earlier, another problem I've run into is securing the stereo as I've got the cage with it and facia but the stereo is really lose, literally just slides out which isn't good.
The one I have is not a CD player so its shorter, I went for this because I have all my music on a usb stick or phone.
But yeah how do I secure it?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Mar 31, 2015 7:07 pm |
|
|
|
|
Joined: Oct 16, 2014
Posts: 267
Trade Rating: +1
|
|
|
|
|
|
|
|
|
|
|
Posted: Tue Mar 31, 2015 7:36 pm |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
It has the short cage with it already, there's no support at all behind the stereo so the back dips down and when I take the usb lead out the stereo comes too, its as if I need about a 5cm long bolt with a pin on the end so I can use the original rubber mount on the back or some type of bolt extension but can't seem to find any :/
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Mar 31, 2015 11:15 pm |
|
|
|
|
Joined: Apr 14, 2010
Posts: 713
Trade Rating: +2
Location: Gothenburg, Sweden
|
|
| Horton898 wrote: |
| I need about a 5cm long bolt with a pin on the end so I can use the original rubber mount on the back or some type of bolt extension but can't seem to find any :/ |
They do make 'bolt extenders' - typically to connect pieces of treaded rod. Looks like an about 5cm thick/long nut (actual length depends on diameter)...
Haven't seen a HU where the bolt was permanently attached, so I think a simple piece of threaded rod with thread matching the hole in the HU,cut to suitable length, should do it.
A nut at the HU end to lock it against the HU casing ie thread the rod into the hole, then tighten the nut against the case. Add a second nut, or use thread lock, to prevent it vibrating loose).
If the rod is to fat or thin for the rubber plug (IIRC from the ones I've had, the plug end has been slightly thinner than the Hu end), grind down the end, or add tape to make the plug a tight press fit.
| | |
|
|
|
|
| | |
| Silvermetallic 2004 206 RC | |
| | |
|
|
|
|
|
|
|
Posted: Wed Apr 01, 2015 4:57 am |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
Ahh see I didnt know the proper name for it but thats been a great help, thank you!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Apr 01, 2015 7:45 am |
|
|
|
|
Joined: Apr 14, 2010
Posts: 713
Trade Rating: +2
Location: Gothenburg, Sweden
|
|
I think I'ill run into the same issue this weekend as I'll be installing a 'short' HU in my mother's car, and the cage isn't the thickest of sheet metal I've seen. Your post has me forewarned, and I can make sure that I'll have the required materials at hand.
| | |
|
|
|
|
| | |
| Silvermetallic 2004 206 RC | |
| | |
|
|
|
|
|
|
|
Posted: Wed Apr 01, 2015 9:35 am |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
Thanks again for the help, il try to get the bit I need asap and get photos up of the custom support to help others in future.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Apr 01, 2015 10:02 am |
|
|
|
|
Joined: Apr 14, 2010
Posts: 713
Trade Rating: +2
Location: Gothenburg, Sweden
|
|
| Horton898 wrote: |
| Thanks again for the help, il try to get the bit I need asap and get photos up of the custom support to help others in future. |
Just thought of this: the threaded rod connectors are a hardware store item, but IIRC the end that goes into the rubber plug is like 3-4 mm and I just remembered that you can find both connectors (ie female/female) and extenders (male/female) in M3 thread in electronics stores - used as spacers between circuit boards and stand-offs to keep boards away from the inside of a case. Available both in metal and nylon.
| | |
|
|
|
|
| | |
| Silvermetallic 2004 206 RC | |
| | |
|
|
|
|
|
|
|
Posted: Wed Apr 01, 2015 3:00 pm |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
That's a good idea to be honest, I'll pop into barnitts tomorrow afternoon and see if I can pick up whats needed, failing that I was thinking of just getting a 5mm rod around 10cm long, screw it in the back of the stereo, add a bit of tape so the thread isn't damaged and tighen with pliers then force the rubber plug on the end and see how it fits but cut down the rod if needs be.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Apr 11, 2015 1:32 pm |
|
|
|
|
Joined: Apr 11, 2015
Posts: 1
Trade Rating: 0
|
|
Hi did u manage to get the stalk working with the radio replacement????
If so how?
Thanks!!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Apr 11, 2015 6:36 pm |
|
|
|
|
Joined: Nov 26, 2014
Posts: 78
Trade Rating: 0
Location: Earth
|
|
I'm sure there will be a way to wire the stalk up but I couldn't figure it out, there will be plenty of people on here that have done it, if I am right there are two types of adapters to do it but which one you need depends on which stalk you have fitted, personally i just ended up removing it all together for three reasons,
One - The stereo isn't exactly a stretch
Two - If needs be can be controlled by Bluetooth unlike the old standard unit
Three - The stalk got in my way lol
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [101]:
Visitors: 101
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
