The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Forums Home

Forum FAQ

BSI
Forum Index › 206 Problems

watchs.gif

Author

Message

danielvella

Posted: Thu May 26, 2016 8:37 am

Joined: May 26, 2016
Posts: 1
Trade Rating: 0

Hi I have a problem with my 2005 206. I had an ecu fault and replaced with a second hand one. Than I also had to replace the BSI because the engine was turning but not running because of the immobilizer. However since changing the BSI some of the functions were not functioning. Managed to fix these issues except the rear wiper, ac, interior central lock button and alarm. Now I have information that these fault can not be fixed because the BSI that I installed is of an older version of the 206. Is it possible to re install my original BSI and do something about the immobilizer?

Steve206

Posted: Thu May 26, 2016 11:30 am

Joined: Feb 07, 2010
Posts: 2720
Trade Rating: +6
Location: UK

Depends. Give some info on the year of the car and model.


	Work in Progress

Timon2210

Posted: Wed Jun 01, 2016 1:06 pm

Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine

Well usually when you have a problem with the ECU,and you need to replace it to fix it,you need to buy a set ( ECU+BSI+KEY),and the donor car should have the same feat. as your car do,regarding engine size and model,some function can be configured using PP2000,but if the model is older than your car,it might not be working as the electrical system might be diff.
So the best solution is to get your BSI and ECU back,and get your ECU fixed at BBA or similar companies,OR have another set from a matching car as yours.

Good Luck


	My 206 Project-Pride & Joy

watchs.gif		All times are GMT
Forum Index › 206 Problems Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum